REVIT

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

REVIT

Also available with lock – under product code 102-1

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

REVIT

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

Site location: The 101 series of dispensers are an industry standard and can be used in any room or site location. The 101J offers maximum towel capacity in a compact unit.

Dispensing: Universal paper towel dispenser will accept all standard roll towels (max. 7-1/4″ diameter and up to 10″ long). This includes almost all 425 ft. jumbo rolls and the Scott 500 ft. rolls.

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Jumbo roll is suspended on a non removable towel support bar.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access bottom of unit to floor must not exceed 44″ (111.7).

REVIT

Site Location: The compact size and variety of finishes makes the 105 and 107 ideal for use in any room or site location.

Dispensing: The paper towel dispenser opening will dispense multifold and “C” fold towels.

Features: Towel opening has rolled safety edge (black finish on all units).  All units come with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.

SS features: One piece coverall door.  Stainless steel (304, No. 4 brushed) construction.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2 kg. (4-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 48″ (120).

REVIT

Site Location: The compact size and variety of finishes makes the 105 and 107 ideal for use in any room or site location.

Dispensing: The paper towel dispenser opening will dispense multifold and “C” fold towels.

Features: Towel opening has rolled safety edge (black finish on all units).  All units come with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.

SS features: One piece coverall door.  Stainless steel (304, No. 4 brushed) construction.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2 kg. (4-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 48″ (120).

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the paper towel dispenser.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the paper towel dispenser.

Code 109-50S: All welded construction of 22 gauge no. 4 brushed finish stainless steel.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of paper towel dispenser.

Code 109-50P: Tough polycarbonate vandal resistant smoked transparent door.

Shipping Weight:  7 lbs. (3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Site location: Ideal for high traffic areas

Dispensing: When pulling on exposed length of towel the touch free paper towel dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for next dispensing action. This hands free mechanical dispenser reduces paper flow and provides maximum hygiene. Designed to dispense jumbo roll towels with a maximum diameter of 8″. Comes with keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance.

Code 109-60S: all welded construction of 22 gauge no. 4 brushed finish stainless steel.

Code 109-60W: White epoxy powder finish.

Code 109-60P: Smoked polycarbonate cover.

Shipping weight: 13.5lbs (6 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 43″ (109.2 cm). Mounting screws provided.

Site location: Ideal for high traffic areas

Dispensing: When pulling on exposed length of towel the touch free paper towel dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for next dispensing action. This hands free mechanical dispenser reduces paper flow and provides maximum hygiene. Designed to dispense jumbo roll towels with a maximum diameter of 8″. Comes with keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance.

Code 109-60S: all welded construction of 22 gauge no. 4 brushed finish stainless steel.

Code 109-60W: White epoxy powder finish.

Code 109-60P: Smoked polycarbonate cover.

Shipping weight: 13.5lbs (6 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 43″ (109.2 cm). Mounting screws provided.

REVIT

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Paper towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of touchless paper towel dispenser.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

REVIT

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Paper towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of touchless paper towel dispenser.

Code 109-70S: All welded construction of 22 gauge no. 4 brushed finish stainless steel.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the touchless paper towel dispenser.

Tough polycarbonate vandal resistant smoked transparent door.

Shipping Weight:  7 lbs. (3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Site location: Ideal for medical offices first aid and lunch rooms.

Features: All welded construction 18 gauge steel.  Tension springs restrict paper consumption.  Pivot arm hinged on hardened steel rivets.  Concealed locking device prevents pilferage and vandalism.  Designed to dispense standard 11″ rolls.

Shipping weight: 2 lbs. (.9 kg).

Installation: Position bottom of fixture 48″ 122 cm from floor. Secure to wall through mounting holes using screws provided.

Site Location: Compact fixture is well suited for multiple mountings in large high traffic areas and an ideal companion to stand alone or wall mounted waste receptacles.

Dispensing: Universal towel dispenser will accept all standard multifold and roll towels.

Features: Stainless steel (304, # 4 brushed) safety guarded saw tooth cutting bar. Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with a tumbler keyed lock.  Door is hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel recessed body.

Installation: Code 135A: Provide 18-1/4″ (46.5) high x 12-1/2″ (31.8) wide x 6″ (15.2) deep wall opening.  Code135B: Provide 18-1/4″ (46.5) high x 12-1/2″ (31.8) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required.  For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

REVIT

Site Location: Extra deep fixture is ideal for high traffic areas.

Dispensing: Universal towel dispenser will accept all standard 8″ wide roll towels.  Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.

Materials: Stainless steel (safety guarded) saw tooth cutting bar.
Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with tumbler keyed lock. Door is hinged with full length stainless steel piano hinge.  Recessed body is corrosion resistant galvanized steel (20 ga.).

Installation: Provide 24-5/8″ (62.5) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160), this results in the push bar lever being 47″ (119.3 cm) or less from floor.

Site location: Extra deep fixture is ideal for high traffic areas.

Dispensing: Universal touchless paper towel dispenser will accept all standard 8″ wide roll towels.  Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.

Door: Heavy duty 18 gauge stainless steel door (304, #4 brushed finish). Secured with tumbler keyed lock.

Hinges: Door is hinged with full length stainless steel piano hinge.

Recessed Body: Corrosion resistant galvanized steel (20 ga.).

Installation: Provide 24-5/8″ (62.5) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening.  Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160cm) (or bottom of rough opening 38″ (96.5cm) from floor), this results in the sensor area being 47″ (119.3 cm) or less from floor.

Site Location: Ideal for areas requiring a heavy duty economical dispenser.
Tension springs restrict paper consumption to prevent free wheeling of roll.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance.  All welded construction of 18 ga. steel.  Pivot arms hinged on hardened steel rivets.  Tension springs reduce paper consumption and stops free wheeling.  All surfaces finished in polished chrome.

Shipping Weight: .45 kg (1 lb.)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7).
Mounting screws provided.

Specifications:

Site Location: The hooded tissue dispensers offer an attractive means of preventing product pilferage and restricting paper consumption.

Dispensing: Roll tissue dispensers are standard Frost codes 146 (single) and 150 (double).

Features: Sloped hood has tumbler keyed lock to prevent theft and vandalism. Front loading for easy service and maintenance. All welded construction of 22 gauge stainless steel. Pivoting front hinged on hardened steel rivets.

Shipping weight: 156S – .9kg (2lbs), 158S – 1.3kg (3lbs).

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.

Specifications:

Site Location: The hooded tissue dispensers offer an attractive means of preventing product pilferage and restricting paper consumption.

Dispensing: Roll tissue dispensers are standard Frost codes 146 (single) and 150 (double).

Features: Sloped hood has tumbler keyed lock to prevent theft and vandalism. Front loading for easy service and maintenance. All welded construction of 22 gauge stainless steel. Pivoting front hinged on hardened steel rivets.

Shipping weight: 156S – .9kg (2lbs), 158S – 1.3kg (3lbs).

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.

Site Location: Ideal for areas requiring a heavy duty economical dispenser.
Tension springs restrict paper consumption to prevent free wheeling of roll.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance.  All welded construction of 18 ga. steel.  Pivot arms hinged on hardened steel rivets.  Tension springs reduce paper consumption and stops free wheeling.  All surfaces finished in polished chrome.

Shipping Weight: .9kg (2 lbs.)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7).
Mounting screws provided.

Specifications:

Site Location: Shelf toilet tissue dispenser provides a convenient area for users to place articles such as bags or purses.

Features: New rounded safety edge detailing. Shelf and back formed from 22 gauge stainless steel no. 4 brushed finish. Comes complete with double roll toilet tissue dispenser. Toilet tissue dispenser has concealed locking device. Dispenser finish is polished chrome, see Frost code 150 PDF.

Shipping weight: 5lbs (2.25kg)

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.

Site location: Ideal for areas requiring a heavy duty economical dispenser. Semi-concealed top promotes the use of one roll at a time.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has a capacity of two rolls per unit.  Comes with keyed tumbler lock to prevent pilferage and vandalism.  Front loading for easy service and maintenance.  Tissue rolls are not removable without keyed access.  Welded construction of both 18 ga. (front) and 20 ga. (back) cold rolled steel.  Body secured to back with full length piano hinge.

Shipping Weight: 1.35 kg. (3 lbs.)

Installation: For unrestricted access, bottom of top roll to floor should not exceed 44″ (111.7). Mounting screws provided.

REVIT

Site Location: Ideal for areas requiring a heavy duty efficient dispenser.
The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.  This insures that the custodian is replacing empty rolls only and not having to deal with two half empty rolls during maintenance rounds.

Dispensing: Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.  All stainless steel unit, welded construction of both 18 and 20 gauge SS.

Shipping Weight: 2.4 kg ( 5.5 lb.).

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7). Mounting screws provided.

Site Location: Ideal for areas requiring space savings. The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.

165 Dispensing: Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.

Materials: Frame is all stainless steel one piece, welded construction of 22 gauge ss.

Installation: For unrestricted access, bottom of rough opening to floor should not exceed 44″ (111.7). Provide rough opening 12-1/2″ high x 12-3/8″ wide. Attach frames to partition, when secure slip toilet tissue unit through frame and secure to back of frame with mounting screws provided.

Site Location: Ideal for areas requiring a heavy duty efficient dispenser. The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.

Dispensing:  Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.  

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.  All stainless steel unit, welded construction of both 18 and 20 gauge SS.

Recessed frame: All stainless 22 gauge type 304 number 4 finish.

Shipping Weight: 4 kg. (10 lbs.)

Installation: For unrestricted access, bottom of rough opening to floor should not exceed 44″ (111.7). Provide rough opening 12-3/8″ high x 6-3/8″ wide x 3-3/4″ deep. Attach backing to vertical members to depth shown above, slip toilet tissue unit through rough opening and secure to backing with mounting screws provided.

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive all metal keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 3 lb. (1.4 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive stainless steel keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 3 lb. (1.4 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive all metal keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 4 lbs., (2 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive stainless steel keyed lock package.  Welded all steel construction offers maximum fire protection. Holds 13″ jumbo roll.

Shipping Weight: 4 lbs., (2 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.

REVIT

Site location: Ideal for high traffic areas requiring the durability of an all metal exterior.

Dispensing: Holds two 9” (230mm) jumbo toilet tissue rolls. Moulded spindles can accommodate 2-1/4” or 3” (57 or 76mm) diameter cores. Spring loaded access tray will lock into position only when first roll on left side is depleted. When door is opened, access tray will return to original position. The custodian can then place the stub roll on the left side (default open position) and a full 9” roll in the blocked right side of the unit.

Materials: Door is drawn 18 ga. ss type 304 with brushed finish. Single viewing slot reveals tissue.
Equipped with tumbler lock.

Installation: Recommended mounting height for double roll dispenser: Insure the top of unit does no exceed 31” (785) from height of floor.

Site location: Ideal for high traffic areas requiring the durability of an all metal exterior.

Dispensing: Holds two 9” (230mm) jumbo toilet tissue rolls. Moulded spindles can accommodate 2-1/4” or 3” (57 or 76mm) diameter cores. Spring loaded access tray will lock into position only when first roll on left side is depleted. When door is opened, access tray will return to original position. The custodian can then place the stub roll on the left side (default open position) and a full 9” roll in the blocked right side of the unit.

Materials: Door is drawn 18 ga. crs with epoxy coated finish. Viewing slot reveals tissue quantity.
Equipped with tumbler lock.

Installation: Recommended mounting height for double roll dispenser: Insure the top of unit does no exceed 31” (785) from height of floor. See front view for mounting hole locations.

Site location: Ideal for areas where the dispensing of standard or quality facial tissues is required. Face plate manufactured from 20 ga. steel.

Features: Die formed safety edge on diamond shaped opening allows easy removal of facial tissue.  Recessed body is die formed from 20 ga. corrosion resistant galvanized steel.
Slide catches secure face plate to recessed body.

Shipping Weight: 2 lbs. (.9kg)

Installation: Provide wall opening 11-1/4″ wide (13.4cm) x 5-1/4″ high (13.4cm) x 2-1/4″ deep (5.7cm). Secure recessed body to wall using mounting screws provided. Individually packaged.

Site Location: Ideal for areas where the dispensing of standard or quality facial tissues is required.

Features: One piece face plate and back manufactured from 20 ga. steel. Die formed safety edge on diamond shaped opening allows easy removal of facial tissue. Front pivots open on steel rivets for easy access and loading. Front secured with “P” keyed lock to prevent theft.

Shipping Weight: 2 lbs. (.9kg)

Installation: Position in desired location and secure to wall. Mounting screws provided.

Materials: Body and back formed from 22 ga. steel. Body hinged on hardened steel rivets pivoting forward for easy loading and maintenance.  Level gauge slot on front of unit. Friction catch to secure unit in closed position.  Designed to dispense standard 4 oz. rolled edge regular and cone cups.

Shipping Weight: 2 lbs. (.9 kg)

Installation: Position bottom of fixture 48″ (122cm) from floor. Secure to wall using screws and mounting holes provided.

Materials: Body and back formed from 22 ga. steel. Body hinged on hardened steel rivets pivoting forward for easy loading and maintenance.  Level gauge slot on front of unit. Friction catch to secure unit in closed position.  Designed to dispense standard 4 oz. rolled edge regular and cone cups.

Shipping Weight: 2 lbs. (.9 kg)

Installation: Position bottom of fixture 48″ (122cm) from floor. Secure to wall using screws and mounting holes provided.

Site Location: Economical table napkin dispenser comes in three finishes to suit both institutional and commercial applications. Note: Code 195B and Code 195W are special order, minimum quantity of 50 units required.

Dispensing: Will accept all standard napkins.

Features: One piece die formed body of 22 gauge steel with slightly radiused corners. Spring loaded pressure plates provide consistent dispensing of napkins. Duel sided dispensing. Rubber feet to protect countertops.

Site Location:

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).

Site Location:

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 105 litres (28 US, 23 imp. gal.), shipping weight: 14 kg. (27lbs.)

Liner: 300-500: For code 300, 80 litres (21 US, 17.5 imp. gal.), Shipping weight 5.8 kg. (13 lbs.).
Dimensions: 31″ (78.7) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 301-NL: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg. (23 lbs.)

Liner: 301-500: For code 301, 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 302-NL: 41 litres (11 US, 9 imp. gal.), shipping weight: 10 kg.(19 lbs.)

Liner: 302-500: For code 302, 41 litres (11 US, 9 imp. gal.), Shipping weight: 2.7 kg. (6 lbs.)
Dimensions: 16″ (40.6) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: This stainless steel garbage can is intended for areas where extra durability is required.  The medium unit will fit under most counter tops.

Features: Rounded soft edge design.  All welded construction of 22 gauge stainless steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  Comes with standard bag holder apparatus.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg.(23 lbs.)

Liner: Code 301-500: 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing recycling container can be positioned where ever recycling receptacles are required, including under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use where a recycle program is required.

Features: The recycling bin has a rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint (easily identifiable recycling blue colour) and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg.(23 lbs.)

Optional Liner: Code 301-500: 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The 303 wall mounted waste receptacle is designed to conserve floor space in medium to light duty areas.

Materials: Garbage can has all steel construction that offers maximum fire protection with no openings on sides or bottom of unit. Tight sealing head and spring loaded door promote oxygen starvation. When used with optional galvanized liner there is added insulative fire protection. Comes with standard bag holder apparatus.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.). Recommended bag size: 26″ x 36″

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: The 303 wall mounted waste receptacle is designed to conserve floor space in medium to light duty areas.

Materials: Garbage can has all steel construction that offers maximum fire protection with no openings on sides or bottom of unit.
Tight sealing head and spring loaded door promote oxygen starvation. When used with optional galvanized liner there is added insulative fire protection. Comes with standard bag holder apparatus.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.). Recommended bag size: 26″ x 36″

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted waste receptacle is designed to conserve floor space in medium to heavy duty areas.  All steel construction offers maximum fire protection with no openings on sides or bottom of unit.  Tight sealing head and spring loaded door promote oxygen starvation. Comes with standard bag holder apparatus.

Capacity/Shipping Weight: Garbage can has a capacity of 17 gal. (77 litres), shipping weight: 27 lbs. ( 12.2 kg.)

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted waste receptacle is designed to conserve floor space in medium to heavy traffic areas. Stainless steel construction offers added durability.

Features: Stainless steel construction offers maximum fire protection with no openings on sides or bottom of unit. Tight sealing head and spring loaded door promote oxygen starvation. 

Materials: Garbage can has double spring loaded door with full length piano hinge. Comes with standard bag holder apparatus.  20 ga. stainless steel type 304 body, 20 ga. Stainless steel head.

Capacity: 77 litres (17 gal.). Shipping weight: 12.2 kg (27 lbs.).

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted recycling receptacle is designed to conserve floor space in medium to heavy duty areas.  All steel construction offers maximum fire protection with no openings on sides or bottom of unit.  Tight sealing head and spring loaded door promote oxygen starvation. Comes with standard bag holder apparatus.

Capacity/Shipping Weight: Recycle bin is 17 gal. (77 litres), shipping weight: 27 lbs. ( 12.2 kg.)

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site Location: This free standing waste container is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage  can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Garbage can comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This free standing waste receptacle is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This free standing waste receptacle is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This stainless steel free standing waste receptacle offers maximum capacity with the quality and durability of an all stainless unit without the commitment of wall mounting. The 310J offers clean geometric design lines with radiused corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 20 ga. Stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 206 litres, (45.25 imp. gal., 54.5 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Materials: All metal construction of outdoor garbage can, heavy gauge HRS. Rotationally moulded heavy duty plastic liner. Capacity 35 imp gal. 160 litres.

Finish: RAL super durable TGIC-Free polyester powder coating.

Features: Side opening allows for easy and ergonomic access to waste receptacle liner. Hidden latch closing prevents unwanted access. Unique design part of family of new products which can be found at www.frostsitefurnishings.com. Clean detailing in a rugged practical application. Lid comes with five colour choices; blue, black, red, green, or yellow. Easy installation into any outdoor location with anchorable feet.

Dimensions: 28.5″ W x 23″ in diameter.

*Note: full customization available with minimum order requirements

Site Location: Large capacity outdoor waste container.

Features: Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 non removable stainless steel top.  Roll formed 22 gauge stainless steel body garbage can.  22 ga. stainless steel spun bottom.

Volume: 27.5 imp gallons, 32 US, (125 litres).

Site Location: Large capacity outdoor ash bin and waste container.

Features: Four inch waste inlet opening.  Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body garbage can.  22 ga. stainless steel spun bottom.

Volume: 27.5 imp gallons, 32 US, (125 litres).

Site Location: Wall mounted outdoor waste receptacle.

Features: Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction outdoor garbage can.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.

Volume: 13.5 imp gallons, 16 US, (62 litres).

Shipping Weight: 25 lbs. (11.5 kg)

Installation: Insure top of unit does not exceed 48” (120) from floor level.

Site Location: Large capacity wall mounted ash bin and waste container.

Features: Four inch waste inlet opening.  Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.

Volume: Garbage can is 13.5 imp. gallons, 16 US, 62 litres.

Shipping Weight: 25 lbs. (11.5 kg).

Installation: Insure top of unit does not exceed 46” (117) from floor level.

Site location: Wall mounted recycling container fixed design eliminates the possibility of blocking exits in the event of an emergency.

Features: Flexible modular component design to accommodate specific separation requirements.
Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Two leak proof roto moulded polyethylene liners. Optional metal liners available on special order (Code 315-500G). Full length piano hinge on door. Magnetic latch on door. Assists commercial and institutional organizations with source separation programs or recycle programs. Each liner has a 67 litre capacity, 134 litres in total (29 imp. gal. In total).

Labels Included: Recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French.

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 50 lbs. (23 kg.)

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: The recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs or recycle programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Code 315-BBD backboard display holder is easily attached to Frost code 315 two stream wall mounted recycling stations. This will allow the user to customize the images relating to the materials that are required to be placed in the unit and enhance visability. Customized displays to be inserted in the holder are available upon request and do not come with code 315-BBD. Code 315-BBD is the backboard display holder only.

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Since Frost manufactures on site, we are pleased to offer custom recycling inlet shapes and colours. These are available on special order and based on minimum order quantities (available in both the 316 and 315 models). Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: The recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs or recycle programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Minimum Order Quantity: On custom recycling units there is a minimum 24 unit order quantity with a 4-6 week lead time for delivery.

Shipping Weight: 75 lbs. (23 kg.)

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation or recycle requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316 recycling bins.

Labels Included: Comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Site location:  Code 316 allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: Comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Site Location: Can be mounted to any wall with mounting bracket provided.

Features: Stainless steel construction of waste bin is best suited for high traffic areas. Garbage can is completely removable for convenient maintenance. Comes with standard bag holder apparatus. Code 327 provides extra large waste capacity. All stainless welded construction.

Capacity: Code 326: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.) Code 327: 15 gal. (68 litres), shipping weight: 29 lbs. (13 kg.)

REVIT

Site Location: Semi recessed waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Features: All stainless welded construction with removable waste bin.  Semi recessed design provides large capacity garbage can with minimum space.  Code 337 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.

Materials: Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. (13kg.).

Installation: Provide wall opening 28-3/4″ (73.3)H x 16″ (40.6)W x 4″ (10.2) D. Mount recessed frame first, then insert waste bin using bracket provided. For barrier free mounting insure that top of waste receptacle does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Features: All stainless welded construction with removable waste bin.  Semi recessed design provides large capacity garbage can with minimum space.  Code 337 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.

Materials: Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 15 gal. (68 litres), shipping weight: 29 lbs. (13kg.)

Installation: Provide wall opening 28-3/4″ (73.3)H x 16″ (40.6)W x 4″ (10.2) D. Mount recessed frame first, then insert waste bin using bracket provided. For barrier free mounting insure that top of waste receptacle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: Compact waste receptacle is ideal for low traffic areas.

Materials: Garbage can is heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with tumbler keyed lock. All doors are hinged with full length stainless steel piano hinges. Corrosion resistant galvanized steel (20 ga.).
Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge. Removable leak proof roto moulded liner with 22.5 litre capacity (5 Imp. gal., 6 gal. US).

Installation: Code 340A: Provide 37-3/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening. Code 340B: Provide 37-3/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

REVIT

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).

Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto mouded liner with 9.5 litre capacity (2.1 imp. gal., 2.5 US gallons).

Installation: Code 415A: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 415B: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.  Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.  Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required.  For unrestricted access, height of top of unit to floor must not exceed 63″ (160).

REVIT

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Universal towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).  Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform.

Features: Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, bottom of rough opening to floor must not exceed 6-1/2″ (16.5), this will result in sensor being 47″ (119.3 cm) or less from floor.

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.
Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.
Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).
Secured with two tumbler keyed locks.
All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160).

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Paper towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).

Features: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform. Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening.
Drill mounting holes as required. For unrestricted access bottom of rough opening to floor must not exceed 25-3/4″ (65 cm), this will result in sensor being 47″ (119.3 cm) or less from floor.

REVIT

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.  Designed to dispense 500 multifold towels.  All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacities: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6kg.)  Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3kg.)  

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D.  Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of door does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.  Designed to dispense 500 multifold towels.  All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacities: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D.  Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of door does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth. Control dispenser reduces paper waste.

Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock. Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).

Materials: All stainless welded construction with locking removable waste bin.
Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that push lever does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422-70C:11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth. Control dispenser reduces paper waste.

Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock. Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).

Materials: All stainless welded construction with locking removable waste bin.
Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that push lever does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

REVIT

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacities: 606: 15 no. 4 napkin packages, 11 no. 6. 607: 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacities: 606: 15 no. 4 napkin packages, 11 no. 6. 607: 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacities: 606: 15 no. 4 napkin packages, 11 no. 6. 607: 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacities: 606: 15 no. 4 napkin packages, 11 no. 6. 607: 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacity: 15 no. 4 napkin (11 no. 6), 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacity: 15 no. 4 napkin (11 no. 6), 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

Site Location: The recess mounted vendor line is detailed for architectural applications requiring minimal projection from wall.

Materials / Features: Coverall door is all welded stainless steel construction, 20 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  Recessed wall box of 20 gauge satin coat galvanized.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (single coin) vending.

Capacity: 15 no. 4 napkin packages, 11 no. 6.

Installation: Provide wall opening of 25-5/8″H (65.4) x 10-1/4″W (26) x 4″D (10.2).

Site Location: The recess mounted vendor line is detailed for architectural applications requiring minimal projection from wall.

Materials / Features: Coverall door is all welded stainless steel construction, 20 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  Recessed wall box of 20 gauge satin coat galvanized.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (single coin) vending.

Capacity: 22 standard tampon tubes.

Installation: Provide wall opening of 25-5/8″H (65.4) x 10-1/4″W (26) x 4″D (10.2)

REVIT

Site Location: The recess mounted vending machine line is detailed for architectural applications requiring minimal projection from wall.

Materials / Features: Coverall door is all welded stainless steel construction, 20 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  Recessed wall box of 20 gauge satin coat galvanized.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (single coin) vending.

Capacity: 15 no. 4 napkin (11 no. 6), 22 standard tampon tubes.

Installation: Provide wall opening of 25-5/8″H (65.4) x 15″W (38.3) x 4″D (10.2).  Drill mounting holes as required and secure to wall. For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

Features: Coin mechanisms can be free or specified to take, 25 cent, two quarter 50 cent or 1 dollar Canadian coin.  Full coverall door designed with tapered corners.  Heavy duty 16 gauge steel door mounted onto 18 gauge chassis.  All metal coin mechanism with built in slip clutch. Three tumbler keyed locks.  Full length solid steel dead bolt secures door to chassis.  Semi-concealed padlock mounting to dead bolt. Padlock is not included.  Optional mounting holes for 1/4″ diameter lag type bolts.

Shipping weight: 27 lbs. (12.3 kg).

Installation:  To provide barrier free access insure that crank handle on coin mechanism does not exceed 47″ (120) above the floor.  Mounting hole centres 24″ (60.9) high x 7″ (17.8) wide for regular #8 screws and 24″ (60.9) high x 8″ (20.3) wide for 1/4″ diameter lag type bolts. Lower mounting holes should not exceed 40″ (101.6) in height from floor level.

Padlock: Padlock for dead bolt should have a 5/16″ shank diameter.

Features: Coin mechanisms can be free or specified to take, 25 cent, two quarter 50 cent or 1 dollar Canadian coin.  Full coverall door designed with tapered corners.  Heavy duty 16 gauge steel door mounted onto 18 gauge chassis.  All metal coin mechanism with built in slip clutch. Three tumbler keyed locks.  Full length solid steel dead bolt secures door to chassis.  Semi-concealed padlock mounting to dead bolt. Padlock is not included.  Optional mounting holes for 1/4″ diameter lag type bolts.

Shipping weight: 27 lbs. (12.3 kg).

Installation:  To provide barrier free access insure that crank handle on coin mechanism does not exceed 47″ (120) above the floor.  Mounting hole centres 24″ (60.9) high x 7″ (17.8) wide for regular #8 screws and 24″ (60.9) high x 8″ (20.3) wide for 1/4″ diameter lag type bolts. Lower mounting holes should not exceed 40″ (101.6) in height from floor level.

Padlock: Padlock for dead bolt should have a 5/16″ shank diameter.

Features: Coin mechanisms can be free or specified to take, 25 cent, two quarter 50 cent or 1 dollar Canadian coin.  Full coverall door designed with tapered corners.  Heavy duty 16 gauge steel door mounted onto 18 gauge chassis.  All metal coin mechanism with built in slip clutch. Three tumbler keyed locks.  Full length solid steel dead bolt secures door to chassis.  Semi-concealed padlock mounting to dead bolt. Padlock is not included.  Optional mounting holes for 1/4″ diameter lag type bolts.

Shipping weight: 27 lbs. (12.3 kg).

Installation:  To provide barrier free access insure that crank handle on coin mechanism does not exceed 47″ (120) above the floor.  Mounting hole centres 24″ (60.9) high x 7″ (17.8) wide for regular #8 screws and 24″ (60.9) high x 8″ (20.3) wide for 1/4″ diameter lag type bolts. Lower mounting holes should not exceed 40″ (101.6) in height from floor level.

Padlock: Padlock for dead bolt should have a 5/16″ shank diameter.

Quality in feminine hygiene products makes a difference. Our premium brand line of feminine hygiene products combined with our extensive knowledge of the vended product industry, help provide women with the best products available, when away from home.

Code 650TA:  Tampons

Code 650NA: Feminine Napkins

Site Location: The surface mounted vendor line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Powder coated epoxy polyester hybrid finish. All welded construction of 20 gauge steel. Door hinged with full length steel piano hinge and secured with two tumbler keyed locks. All units have removable coin box with tumbler lock keyed different from door. Provision for padlock, for added security.

Denominations: Interchangeable coinage mechanism for $.50, $1.00 and $2:00 (one dollar coin) vending.

Capacities: 15 Detergent single use packages. 15 Fabric Softener packages.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction.

Features: Pivoting self closing lid.  French/English napkin disposal label is embossed on lid.

Materials, 620: All welded steel construction (22 ga.).
Pivoting door utilizes full length piano hinge.

Shipping weight: 1.8 kg. (4 lbs.) per unit.

Installation: Position cabinet 26″ (66 cm) from floor. Secure to wall using mounting holes and screws provided.
For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Overall dimensions: 8″W (20.3) x 13-1/4″H (33.6) x 4-1/2″D (11.4).

Code 621 is a case of 500 disposable wax paper bag liners designed for code 620 and 622 feminine napkin disposals.

621 Bag Size: 10 1/4″ long x 7″ wide x 4″ open span.

REVIT

Site Location: Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction.

Features: Pivoting self closing lid.  French/English napkin disposal label is embossed on lid.

Materials, 622: All welded stainless steel construction (22 ga.).
Pivoting door utilizes full length stainless steel piano hinge.

Shipping weight: 1.8 kg. (4 lbs.) per unit.

Installation: Position cabinet 26″ (66 cm) from floor.
Secure to wall using mounting holes and screws provided.
For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Overall dimensions: 8″W (20.3) x 13-1/4″H (33.6) x 4-1/2″D (11.4).

REVIT

Site Location: Ideal for high traffic areas requiring hands free operation.

Features: Door is opened when hand is placed within 4” (10 cm) of sensor in door opening area and remains open for 5 seconds there after. Counterbalanced door swings freely in the event of depleted or missing batteries.  Unit is powered by 4 “c” alkaline batteries (not included).  Battery life is 10,000 cycles, or 2 years.
Polyethylene leakproof liner capacity: 5.1 litres. (1.1 imp. gal.)

Materials: All metal construction, stainless steel cover all design.

Shipping weight: 8.5 lbs. (4 kg).

Installation: For unrestricted access, sensor area of unit to floor should not exceed 48″ (120 cm). Mounting screws and instructions included.

REVIT

Site Location: Recessed coverall door napkin disposal can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: All stainless waste bin.  Coverall door design.  Recessed clean easy grip handle. Waste bin completely removable for convenient maintenance.  Leak proof rotationally moulded plastic bin.  Plastic bin is completely removable.  Door is self closing counter balanced and secured to recessed body.  Recessed body is made of corrosion resistant galvanized steel.

Shipping weight: Shipping weight 2.5 Kg (6 lbs.) per unit.

Installation: Provide wall opening 5-7/8″ (15) wide x 9″ (23) high x 4″ (10) deep.
Drill mounting holes in wall box as required.  Insure top of unit, when mounted, does not exceed 48″ (120) from floor level.  Apply English/French “Napkin Disposal” label to lower front of unit.

Site Location: The Code 640 unit is designed for use with standard partition systems with one unit serving two compartments. The same unit is used for end wall mounting when there is an odd number of compartments.

Features: One unit serves two compartments.  Removable leak proof plastic waste bin for easy maintenance.  Bin capacity: 5 litres (1 imp. gallon, 1.3 US gallons).  Waste bin removable from one side.  Self closing inlet doors. Comes with English / French labels.  Full length stainless steel piano hinges.  All welded stainless steel construction, 22 gauge type 304 No. 4 brushed finish.

Installation: Provide wall opening 11-1/8”W (28.5) x 15-3/8”H (39.2), end wall installation requires 3″ of depth (7.6). Secure to opening through mounting holes provided.  Position top edge of unit 26″ (66) from floor. For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Features: Chrome plated gravity fed push up type liquid soap valve. Globe screws into wall bracket and valve.

Soap Types: Recommended for use with coconut oil base, easy flowing liquid soaps.

Capacity: Translucent white polyethylene globe has a capacity of 450g (16oz.).

Shipping Weight: .45 kg (1lb.)

Installation: Secure unit to wall through holes in the back of unit with the three mounting screws provided.

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: All chrome plated body and mounting bracket. Chained keyed filter cap. Soap level indicator slots. All mounting screws concealed.

Soap Types: 705-100 is for use with coconut oil base soap at 10-20% solution. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: 12 oz. (340 g)

Installation: Secure mounting plate to wall through holes with four mounting screws provided. Slip dispenser over mounting plate and secure with single machine screw at bottom.

Site Location: All purpose push type dispensing valve is suitable for easy flowing liquid or lotion soaps.

Features: Quality ABS finish. Removable inner soap reservoir for easy cleaning and maintenance. Lockable front cover. Attractive blue and white colour scheme. Completely concealed wall mounting (no visible mounting screws).

Capacity: 1 litre (35 oz.).

Installation: Secure unit to wall, screws, plugs and template provided. Alternately use adhesive pads on smooth dry surfaces.

Site Location:  Extra large capacity soap dispenser with all purpose push type dispensing valve is suitable for high traffic and industrial areas.

Features: Quality ABS finish. With lockable front cover. Removable inner soap reservoir for easy cleaning and maintenance. Attractive blue and white colour scheme. Completely concealed wall mounting (no visible mounting screws). Dispenses a wide range of hygiene products: viscous liquid soaps to thick gels. 2ml shot size.

Capacity: 2 litre (70 oz.)

Installation: Secure unit to wall, screws, plugs and template provided. Alternately use adhesive pads on smooth dry surfaces, also provided.

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: Drawn and welded construction of 20 ga. stainless steel.  Easy refill at top.  Keyed lock filler cap.  Lucite soap level indicator window.  All mounting screws concealed.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: Capacity of 1.2 kg (40 oz.).

Installation: Secure mounting plate to wall through holes with three mounting screws provided. Slip dispenser over mounting plate and secure with single screw through filler cap at top.

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: Drawn and welded construction of 20 ga. stainless steel.  Easy refill at top.  Keyed lock filler cap.  Lucite soap level indicator window.  All mounting screws concealed.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: Capacity of 1.2 kg (40 oz.).

Installation:
Secure mounting plate to wall through holes with three mounting screws provided.
Slip dispenser over mounting plate and secure with single screw through filler cap at top.

REVIT

Site Location: Clean low profile configuration allows for flexible integration with many custom design layouts.

Features: Easy refill at top. Keyed lock filler cap. All mounting screws concealed. Drawn and welded construction of 20 ga. stainless steel.  Lucite soap level indicator window.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: 55 oz. capacity, (1.5 litre).

Installation: Secure mounting plate to wall through holes with three mounting screws provided. Slip dispenser over mounting plate and secure with single screw through filler cap at top.

REVIT

Site Location: Ideal for all types of vanity and countertop mounting.

Features: Less than 5 lbs. of force required to activate pump.  Chrome plated brass housing.  Concealed mounting assembly.  Soap can be top loaded.  4″ spout.

Soap Type: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.

Capacity: 1 litre (32 oz.).

Installation:
Insert threaded shank through 7/8″ dia. hole in vanity with only housing and valve assembly exposed above counter.  Secure with brackets provide below. Attach globe.

Site Location: Hands free soap dispenser is ideal for high traffic areas and multiple mirror mounting.

Features: Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Unit is powered by 3 “c” alkaline batteries (not included).  Battery life is 10,000 cycles. or one year. Low battery indicator (flashes red).  Bulk fill soap viscosity range of: 2,000 – 5,000 cps, (covers most liquid soap products).

Shipping Weight: 2 lbs., (bulk packed 12 units per case)

Capacity: 1 litre. (33 ounces)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Insure touchless unit is mounted 20 cm above any horizontal surface (30 cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning of unit if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.

REVIT

Site Location: Hands free soap dispensers is ideal for high traffic areas and multiple mirror mounting.

Features: Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Unit is powered by 3 “c” alkaline batteries (not included).  Battery life is 10,000 cycles. or one year. Low battery indicator (flashes red).  Bulk fill soap with a viscosity range of: 2,000 – 5,000 cps, (covers most liquid soap products).

Shipping Weight: 2 lbs., (bulk packed 12 units per case)

Capacity: 1 litre. (33 ounces)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Insure stainless steel soap dispenser is mounted 20 cm above any horizontal surface (30 cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning of unit if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.

Site Location: ADA compliant no touch dispenser allows for vanity, easy to reach, mounting.

Features: Hands free controlled dosage provides 1000 hand washes per 800ml bottle. Sensor detects user’s hand to automatically dispense ideal portion of soap. 4” (10) detection range. Refill indicator light appears when soap is low. Fabricated from structural injection moulded plastic with polished chrome finish. Battery indicator light appears when batteries need replacing. Battery Requirements: 4 Alkaline D Cells (not included). Programmable for 800ml and 1600ml soap refilling settings.

Installation: Comes with detailed installation instructions.

Site Location: Ideal for high traffic areas and multiple mirror mounting. Foam soaps reduce consumption and improve washing effectiveness. Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Foam quatity dispensed: 0.7-0.8 cc. Soap container capacity: 800 cc (29.5 ounces). Unit is powered by 4 “AA” alkaline batteries (not included). Battery life is 20,000 cycles or one year. Low battery indicator: flashes blue.

Shipping Weight: 1.25kg, 2.75 lbs, (bulk packed 12 units per case).

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7 cm). Ensure unit is mounted 20cm above any horizontal surface (30cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.

Site Location: ADA compliant no touch dispenser allows for vanity, easy reach, mounting. Foam soaps reduce consumption and improve washing effectiveness.

Features: Bulk loading refill capacity: 1.5 litres (50.7 fl. oz.). Dispensing volume: 1-1.5 ml (.034 – .051 fl. oz.). Viscosity range 1-3000 cp. Takes all foam suitable soaps. Activated sensor range: 3″-4″. LED indicators for low battery, empty soap, and wrong soap type. AC adaptor included, comes with 60″ (1.5 meter) cord.

Materials: Main housing is cast brass with polished chrome finish.

Batteries: Can take 4 AA Alkaline batteries (not included). Battery life: 20,000 cycles or 1 year.

Installation: 25mm (1″) Dia. Hole required. Comes with detailed installation instructions.

Site Location: The recess mounted unit is ideal for custom installations requiring a clean and minimal look.

Features: Door manufactured from 22 ga. stainless steel # 4 finish. Full length SS piano hinge and keyed tumbler lock on door. Recessed corrosion resistant galvanized steel body. Soap tank formed from a tough leak proof polycarbonate. Leak proof soap level indicator window.

Soap Type: dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.  Capacity: of 35 oz.

Installation: Rough opening: 8-1/2W (11.4) x 4-1/2 (11.4)H x 4″ (10.2)D. Drill mounting holes as req.

Base and upright tube are one piece all welded construction (18 ga. cold rolled steel) with a silver powder coated finish. Mounting plate is 12 ga. crs in a white epoxy coated finish. A 7″ x 7″ (18 x18cm) area on the mounting plate can be used for promotional or instruction signage.
The optional waste container on the Code 1600-501 is made of a rotationally moulded polyethylene and is leak proof.

Mounting screws included:
Two (2) 10-24 unc machine screws (Phillips head) to secure dispenser to mounting plate
One (1) 5/16-18 unc machine screw (Phillips head) to secure mounting plate to tube support

Base and upright tube are one piece all welded construction (18 ga. cold rolled steel) with a silver powder coated finish. Mounting plate is 12 ga. crs in a white epoxy coated finish. A 7″ x 7″ (18 x18cm) area on the mounting plate can be used for promotional or instruction signage.
The optional waste container on the Code 1600-501 is made of a rotationally moulded polyethylene and is leak proof.

Mounting screws included:
Two (2) 10-24 unc machine screws (Phillips head) to secure dispenser to mounting plate
One (1) 5/16-18 unc machine screw (Phillips head) to secure mounting plate to tube support

REVIT

Site Location: The 941 stock series mirror is ideal for any location with its vandal resistant three way concealed fastener mounting.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Vandal resistant concealed three way mounting.  Standard float glass with shock resistant primary back.  Full galvanized back panel.

Shipping Weight: Code 941-1824, 10 kg. (23 lbs.), shipped two per carton.

Installation:  Position bottom of mirror 48″ (121) from floor. Positions may vary depending on size and the type of installation.

Site Location: The 941 stock series mirror is ideal for any location with its vandal resistant three way concealed fastener mounting.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Vandal resistant concealed three way mounting.  Standard float glass with shock resistant primary back.  Full galvanized back panel. Note: tempering process may produce slight distortion in the mirror when viewed at a distance.

Shipping Weight: Code 941-1824, 10 kg. (23 lbs.), shipped two per carton.

Installation:  Position bottom of mirror 48″ (121) from floor.
Positions may vary depending on size and the type of installation.

Site Location: Site Location: The 941 adjustable tilt mirror is an economical solution for any location requiring for a tilted mirror.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Tilting angle can be adjusted on site.  Plated brackets and piano hinge mounting.  Standard float glass with shock resistant primary back.  Full galvanized back panel.

Shipping Weight: Code 941-1824AT, 10 kg. (23 lbs.), shipped two per carton.

Installation:  Position bottom of mirror 48″ (121) from floor.  Positions may vary depending on size and the type of installation.

REVIT

Site Location: The 941 fixed tilt mirror is ideal for any barrier free location.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Fixed tilt frame is one piece 20 ga. stainless steel.  Vandal resistant concealed mounting. Standard float glass with shock resistant primary back.  Full galvanized back panel.

Shipping Weight: Code 941-1824, 10 kg. (23 lbs.), shipped two per carton.

Installation:  Position bottom of mirror 48″ (121) from floor.  Positions may vary depending on size and the type of installation.

Site Location: The 9416mm series mirror is ideal for any location with its vandal resistant three way concealed fastener mounting.  One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Vandal resistant concealed three way mounting.  Comes in flush wall mount and fixed tilt.  6mm glass with shock resistant primary back.  Full galvanized back panel.

Shipping Weight: 10 kg. (23 lbs.), shipped two per carton.

Installation: Position bottom of non tilt and fixed tilt mirrors 48″ (121) from floor. Positions may vary depending on the type of installation.

Site Location: The 941SS stainless face mirror comes with a highly polished stainless steel reflective surface, eliminating breakable glass.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly. 20 ga. XL buff stainless steel reflective surface.  Vandal resistant concealed three way mounting. Full galvanized back panel.

Note: Other sizes available on request.

Site Location: The Code 942SS stainless face mirror is ideal for areas requiring maximum protection against vandalism.

Features: One piece 20 ga. XL buff stainless steel.

Installation: Position bottom of mirror 48″ (121) from floor. Positions may vary depending on the type of installation.

Features: Frameless mirror. Polished edges. 5mm glass. Comes with standard mounting clear plastic clips.

Site Location: The code 945 line of mirrors are ideal for locations requiring additional durability and clean seamless detailing.

Features: One piece 18 ga. stainless steel frame has welded and polished corners to provide the ultimate in rigidity and ease of maintenance. Code 945 series mirrors come in 6mm glass with no. 4 brushed finish and vandal resistant concealed mounting. Quick snap on mounting minimizes installation time.

Shipping Weight: Code 945-1824: 10kg. (22lbs). Shipped two per carton.

Installation:  Position bottom of mirrors 48″ (121cm) from floor. Positions may vary depending on the type of installation. Quick snap on mounting minimizes installation time.

Site Location: The code 945FT line of mirrors are ideal for locations requiring additional durability and clean seamless detailing.

Features: One piece 18 ga. stainless steel frame has welded and polished corners to provide the ultimate in rigidity and ease of maintenance. Code 945 series mirrors come in 6mm glass with no. 4 brushed finish and vandal resistant concealed mounting. Quick snap on mounting minimizes installation time.

Shipping Weight: Code 945FT-1824: 13.5kg. (30lbs). Shipped two per carton.

Installation:  Position bottom of mirrors 48″ (121cm) from floor. Positions may vary depending on the type of installation. Quick snap on mounting minimizes installation time.

Features: The code 802 medicine cabinet is a durable economical all steel unit suitable for any location. All welded steel construction, 22 ga. In powder coat white finish. 2 adjustable glass shelves. Cabinet can be inverted depending on preferred door swing. Magnetic retaining catch on door.

Door: One piece 26 ga. stainless steel channel frame in bright annealed finish. Mirror door has painted steel back. Full length piano hinge door Installation.

Installation: Provide rough opening: 13-3/4” (35) wide x 17-7/8” (45.4) high x 3” (7.6) deep

Features: The code 812 medicine cabinet is a durable economical all steel unit for any location. All welded steel construction, 22 ga. In powder white finish. 2 adjustable glass shelves. Cabinet can be inverted depending on preferred door swing. Magnetic retaining catch on door.

Door: One piece 26 ga. stainless steel channel frame in bright annealed finish. Mirror door has painted steel back.
Full length piano hinge door.

Installation: Mounting hole centers are located at 12” (30.5) x 16” (40.6)

REVIT

Features: The code 800S medicine cabinet is a durable economical all stainless steel unit suitable for any location. All stainless steel construction 22 ga. Type 304 no. 4 brushed finish. Two adjustable stainless steel shelves. Cabinet can be inverted depending on preferred door swing. Unique design allows for surface or recessed mounting. Magnetic retaining catch on door.

Door: One piece 24 ga. stainless steel channel frame in bright annealed finish. Standard float glass mirror with stainless steel back. Full length stainless steel piano hinge on door.

Installation: Provide rough opening: 15-1/8” (38.5) wide x 25-3/8” (64.5) high x 4” (10) deep.

Materials: Type 304, 20 gauge stainless steel. Brackets fabricated of type 304, 18 gauge stainless steel.

Specification: Wall plate is provided with one bracket for urinal bottle and one bracket for conventional size bedpan. Brackets are welded to pack plate with smooth edges for maximum safety.

Installation: Mount bottom of unit 48” (120) above floor. Mounting screws provided.

Materials:
Type 304, 20 gauge stainless steel. Brackets fabricated of type 304, 18 gauge stainless steel.
Specification
Wall utensil rack back plate is provided with one bracket for conventional size bedpan, which is ideal for hospitals. Brackets are welded to back plate with smooth edges for maximum safety.

Materials:
 - All stainless steel 22 ga. type 304 #4 finish
- Ventilation is provided by an open space at the top and bottom of the door
- 18ga. stainless steel door is mounted with full length stainless steel hinge
- Removable leak proof 1” deep ss drip pan is ideal for hospitals
- Interior shelves all stainless steel construction 22 ga.

Installation: 
- Provide rough wall opening 15-5/8” w x 29-1/8”h 6-1/2” d.

Materials:
 - Cabinet: 22gauge stainless steel. All welded construction. Type 304 #4 finish. Ideal for hospitals.
- Flanges: 22 gauge stainless steel, type 304 #4 finish.
- Door: type 304, 22 gauge stainless steel, #4 finish. Each door is spring-loaded and secured to cabinet with a full-length stainless steel piano hinge. Doors equipped with pull knobs and   interlocking mechanism. An international graphic symbol indentifies specimen cabinet.
- Spillage Tray: stainless steel type 304. 
Function:
- Interlocking mechanism on self-closing doors prevents both doors from being opened at the same time, provides sight-barrier for complete privacy. Spillage tray is easily removed for cleaning.

Installation:
 - Provide rough wall opening 11-1/2” wide x 10-7/8” high (290 x 275mm). Accommodates  wall thicknesses from 3” to 5-3/4” (75 to 145mm). Slide one flange onto cabinet and align mounting tabs with mounting holes in cabinet. Center cabinet in wall opening. Insert second flange, align tabs with mounting holes and tighten both flanges against wall surface. Unit is secured with four #8 x 1” mounting screws (provided) through cabinet.

Site Location: The 908 is intended for use in less frequented areas.

Features: Heavy duty all stainless ashtray is ideal for pedestrian common areas.  18 gauge stainless steel, 304, # 4 brushed finish (18 and 20 ga. on Code 908).  Secured with tumbler keyed lock.  Door is hinged with full length stainless steel piano hinge.  Offset mounting bracket keeps unit 5/8″ away from wall for extra fire insulation.  Corrosion resistant galvanized steel (22 ga.) inner liner with baffle opening.

Liner Capacity: 1 litre (.25 gal.)

Shipping weight: 11 lbs. (5 kg.), Code 908: 4lbs. (1.8 kg.).

Installation: For unrestricted access, height of cigarette inlet to floor must not exceed 48″ (121 cm) from floor.

Site Location: Ideal for pedestrian common areas.

Features: 18 gauge stainless steel (304, # 4 brushed finish).  Ashtray secured with tumbler keyed lock.
Door is hinged with full length stainless steel piano hinge.  Corrosion resistant galvanized steel (22 ga.) inner liner with baffle opening.  Offset mounting bracket keeps unit 5/8″ away from wall for extra fire insulation. The liner capacity is 2.3 litres (0.5 gal.).

Shipping weight: 11 lbs.

Installation: For unrestricted access, height of cigarette inlet to floor must not exceed 48″ (121 cm) from floor.

Site Location: The 909-100 pedestal is intended for use with the code 909 ash bin to allow for floor mounting where wall mounting is impractical.

Materials: Vertical support shall be 2″ x 2″ crs tubing (14 ga.).  Ash bin mounting plate shall be 1/8″ crs plate.  Floor mounting plate shall be 1/4″ crs plate.  All welded construction.

Shipping weight: 18 lbs.

Installation: Secure ashtray stand to floor with appropriate anchoring system for floor material. Use floor plate as a template to locate mounting holes. Drill holes and set anchors as required.

New rounded corner shelf with safety edges on all protruding sides is 22 gauge stainless stell no. 4 brushed finish welded to stainless steel wall plate. Custom lengths available up to 183cm (54″) long.

Corner shelf is ideal for applications such as shower or regular bathroom stalls.
All welded construction of 22 gauge no. 4 brushed finish stainless steel.

All stainless steel construction 18 ga. type 304 no. 4 finish. Shelf is spring loaded which will return to upright position when load is removed. Mounting bracket fabricated of 18 ga. ss type 304 no. 4 finish.

Shipping weight: 3 lbs. (2 kg) per unit

Installation: Secure to wall using mounting holes and screws provided. For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

All welded construction of 20 gauge type 304 stainless steel no. 4 brushed finish.
Shelf features 3 mop or broom holders, 2 pail hooks and a 5/16″ diameter chrome plated rod for drying cloths.

REVIT

The Frost SP series stock grab bars are of an all stainless steel construction.

Snap flange is 12 gauge stainless with a full 360 degree bead weld to the 18 gauge stainless tubing. Features concealed mounting detailing as shown in illustration above.

Stainless steel 1-1/4″ diameter  Available in 12″, 16″, 18″, 24″, 30″, 32″, 36″, 42″ and 48″ lengths

Site Location: For use on tank less toilet installations.

Materials: 1-1/4” (32mm) Stainless steel tube with a 0.064” wall (1.6mm). Utilizes concealed
Fastening mounting. Backrest is 5/8” (16mm) solid plastic laminate (white finish).

REVIT

Site Location: These units are highly recommended by barrier-free design experts because they provide the optimum approach path for wheelchair use.  Consult applicable codes for specific requirements.

Features: Tubing is either 16 gauge type 304 1-1/4″ O.D. (outside diameter) stainless steel with exposed surfaces in polished satin finish or 16 gauge steel with white finish.  Swing up bar is only as strong as the wall and anchors to which it is attached.  Grab bar must be securely fastened  to wall  to withstand the load it is intended to support.  The Code 1055 series of bars will sustain loads of 250 lbs under it’s intended use. Units must be secured and anchored to wall or approved carrier according to installation specifications by a qualified tradesperson. Mandrel bending process on all curves maintains uniform bar diameter.  Grab bar is manually lowered to horizontal support position and raised for departure.  A locking system enables the flip up grab bar to be locked in either a horizontal or retracted position

Installation: Secure to wall where adequate in wall backing exists.  Use wall plate as a template to locate  mounting holes.  Drill holes and set anchors as appropriate.  Mount grab bar and secure mounting screws.  The 1055 flip up grab bar will sustain loads of 250 lbs. and greater. Also the types of loads (especially dynamic) applied are hard to predict. It’s up to the designer to determine the suitability of the use of these grab bars in this situation. Caution: The grab bar is only as strong as the anchors and wall to which it is attached and therefore must be firmly secured in order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.

See also, 1055-500 – Carrier Stand

Site Location: The horizontal support is intended for use with the code 1055 swing up grab bar to allow for floor mounting where adequate in wall backing is unavailable.

Materials: Carrier stand shall be 1-1/2″ x 3″ x 1/8” thick crs tubing.  Floor mounting plate shall be 3/8″ crs plate.  All welded construction.

Installation: Secure to floor with appropriate anchoring system for floor material. Use floor plate as a template to locate mounting holes. Drill holes and set anchors as required. Anchor bolts should be 3/8″ diameter, with a minimum pull out strength of 3,500 lbs. Medium duty sleeve anchors typically have a 5,300 lb. pullout rating and heavy duty wedge anchors can offer up to 5,900 lbs. Mount carrier stand to anchors and secure swing up grab bar to vertical support. We suggest installation by a qualified tradesman.

Grab Bar Mounting: Requires four 1/4″-20 unc machine screws to secure Frost Code 1055 grab bar to vertical support. For regular mounting a minimum machine screw length of 7/8″ is required. When mounting “in wall” the machine screw length will vary due to the thickness of wall materials and other decorative surfaces. The correct machine screw length should be determined by the contractor or designer of the installation. Mounting screws are not included.

In wall Installation: Threaded inserts on vertical support allow for blind fastening of flip up grab bar during in wall installation. We recommend a spacer tube to be used for in wall drywall installation.

Code 1002-D 12×12: Stainless steel 1-1/4″ diameter

Code 1002-D 24×24: Stainless steel 1-1/4″ diameter

REVIT

Code R1003D 16×24: Stainless steel 1-1/4″ dia., right handed

Code L1003D 16×24: Stainless steel 1-1/4″ dia., left handed

Code R1003D 16×32: Stainless steel 1-1/4″ dia., right handed

Code L1003D 16×32: Stainless steel 1-1/4″ dia., left handed

Stainless steel 1-1/4″ dia.

Code R1006S: Stainless steel 1-1/4″ dia. right handed

Code L1006S: Stainless steel 1-1/4″ dia. left handed

Code 1009-D: Stainless steel 1-1/4″ dia.

Code R1014D: Stainless steel 1-1/4″ dia., right handed

Code L1014D: Stainless steel 1-1/4″ dia., left handed

Code 1015S: Stainless steel 1-1/4″ dia.

Stainless steel 1-1/4″ dia.

Code R1018D: Stainless steel 1-1/4″ dia., right handed

Code L1018D: Stainless steel 1-1/4″ dia., left handed

Code L1020D: Stainless steel 1-1/4″ dia., left handed

Code R1020D: Stainless steel 1-1/4″ dia., right handed

REVIT

Compact flip up shower seat retracts out of way when not in use. One piece phenolic top, 5/16″ (8mm) thick. Unit frame is fabricated from 1″ O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish.

Installation: Mounting hole locations are for reference when providing in wall support. Mounting screws provided.

REVIT – RIGHT

REVIT – LEFT

Site Location: Barrier free design, comes in left or right configuration, right shown.

Features: Compact flip up shower seat retracts out of way when not in use.  One piece phenolic top, 1/2” (13mm) thick.  Unit frame is fabricated from 1” O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction, features full 360 degree welds on all joints.  Support and flanges are also stainless steel with brushed finish.

Load Capacity: The shower seat will support a load of 360 lbs when properly installed. The shower seat is only as strong as the anchors and wall to which it is attached and therefore must be firmly secured in order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.

Installation: Mounting hole locations are for reference when providing in wall support. Final holes should be drilled using shower seat as a template. Mounting screws provided.

Specifications:

Site Location: Corner shower seat provides maximum space utilization. Comes in configuration shown (left handed). Can be changed to be right handed as required on site.

Features: All corners are radiused and ground smooth for safety and ease of cleaning. Extra return flange at front edge provides extra rigidity and comfort when lifting or lowering seat.

Materials: All stainless steel, one piece construction. Seat: 16 ga. stainless steel type 304 with #4 brushed finish. Hinge: 16 ga. stainless steel type 304 bright annealed. Support ledge and clip: 16 ga. stainless steel type 304 with #4 brushed finish.

Installation: Mount seat 17″-20″ from floor with stainless steel mounting screws provided (#10 x2″). Mount clip as close to the corner as possible. Shower seats can only support the loads intended with proper use of anchors and in wall backing. Insure wall struture meets local building codes and the architects specification. Shower seat will sustain a load of 300 lbs.

960: Male symbol, comes with Braille emboss

961: Female symbol, comes with Braille emboss

962: Wheelchair, Male, comes with Braille emboss

963: Wheelchair, Female, comes with Braille emboss

964: Wheelchair symbol only

Site Location: Use on door entrances to washrooms and common areas.

Specifications: Durable engraved plastic signage. All engraved portions are white with blue relief. All signage is self adhesive.

Chrome plated 20 gauge steel surface mounted fixture holds all standard size deodorant blocks.

Site Location: Automatic air freshener has clean low maintenance design will suit most office and retail installations.

Features: Built in LCD clock displays time for easy programming of starting and stopping spray intervals. Set spray start and spray stop to suit your office hours. Spray intervals can range from 1 minute to 60 minutes. Built in counter will display number of sprays.

Battery Details: Maintenance: green LED indicates functioning/spraying. Red LED indicates low batteries should be replaced.

Service life: 10,000 sprays or 1 year, (2 “D” sized heavy duty alkaline batteries,)

Installation: Prior to mounting using self adhesive: clean surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The tape does not allow for repositioning if unit is mounted crooked or askew. Allow tape to set ten hours prior to filling and loading batteries. Mounting holes and screws also provided.

See also:

1107-500: Dry formula aerosol eliminates messy fall-out. V.O.C. Compliant. Eliminates smoke and othermaloders (Net wt.: 6.6 oz, 187 g).

Code 1107-500CIT: Aerosol spray canister, Citrus scent, (7 ounces, 199 grams).
Code 1107-500VAN: Code 1107-500MM: Aerosol spray canister, Mango scent, (7 ounces, 199 grams).

Hose dia: 1 inch. Water pressure: 0.5-7 kgs/cm3

Power: DC6V CR-P2 Lithium Battery. Battery life: About 4 years (or 200,000 flushes), CSA appr.

Sensor detecting distance: Under 100 cm/Water Closet.

Safety distance from sensor to the front wall: 100 cm/Water Closet.

Auto flush mode: 2 seconds flush detected, less than 60 seconds continuous.  4.5 seconds flush detected, more than 60 seconds continuous.

Outlet pipe dia: 1-1/2 inch.

Material: Brass.

Features: Automatic by infrared sensor. Multi-functions flush by mechanical, manual push button and automatically by sensor detecting. More safety with lithium battery.  Low power consumption, the battery can be used about 4 years or 200,000 flushes. Green/ operation indicating light.  Red/ low power indicating light.
Water filter is cleaned automatically. Water volume will not be reduced by a dirty filter. Water proof.

Fast installation: can be re-placed with Sloan or Zurn manual flusher. The module type parts designed assure easier and faster maintenance.

Hose dia: 1 inch. Water pressure: 0.5-7 kgs/cm3

Power: DC6V CR-P2 Lithium Battery. Battery life: About 4 years (or 200,000 flushes), CSA appr.

Sensor detecting distance: Under 60 cm/Urinal.

Safety distance from sensor to the front wall: 200 cm/Urinal.

Auto flush mode: pre-flush/ 2 seconds, main flush/ 4 seconds.

Outlet pipe dia: 1-1/4 inch.

Material: Brass.

Features: Automatic by infrared sensor.  Multi-functions flush by mechanical, manual push button and automatically by sensor detecting.  More safety with lithium battery.  Low power consumption, the battery can be used about 4 years or 200,000 flushes. Green/ operation indicating light.  Red/ low power indicating light. Water filter is cleaned automatically.  Water volume will not be reduced by a dirty filter. Water proof.

Fast installation: can be re-placed with Sloan or Zurn manual flusher. The module type parts designed assure easier and faster maintenance.

One piece 20 gauge type 304 stainless steel hose rack. Designed to hold all standard vacuum hoses.

All welded construction of 18 gauge type 304 stainless steel no. 4 brushed finish. For use with empty pails only.