Quick Browse

REVIT

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

REVIT

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 6-9” length of towel.

Features: Paper towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of touchless paper towel dispenser.

Code 109-70S: All welded construction of 22 gauge no. 4 brushed finish stainless steel.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.

Site Location: Ideal for areas requiring a heavy duty economical dispenser.
Tension springs restrict paper consumption to prevent free wheeling of roll.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance.  All welded construction of 18 ga. steel.  Pivot arms hinged on hardened steel rivets.  Tension springs reduce paper consumption and stops free wheeling.  All surfaces finished in polished chrome.

Shipping Weight: .9kg (2 lbs.)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7).
Mounting screws provided.

REVIT

Site Location: Ideal for areas requiring a heavy duty efficient dispenser.
The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.  This insures that the custodian is replacing empty rolls only and not having to deal with two half empty rolls during maintenance rounds.

Dispensing: Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.  All stainless steel unit, welded construction of both 18 and 20 gauge SS.

Shipping Weight: 2.4 kg ( 5.5 lb.).

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7). Mounting screws provided.

REVIT

Site location: Ideal for high traffic areas requiring the durability of an all metal exterior.

Dispensing: Holds two 9” (230mm) jumbo toilet tissue rolls. Moulded spindles can accommodate 2-1/4” or 3” (57 or 76mm) diameter cores. Spring loaded access tray will lock into position only when first roll on left side is depleted. When door is opened, access tray will return to original position. The custodian can then place the stub roll on the left side (default open position) and a full 9” roll in the blocked right side of the unit.

Materials: Door is drawn 18 ga. ss type 304 with brushed finish. Single viewing slot reveals tissue.
Equipped with tumbler lock.

Installation: Recommended mounting height for double roll dispenser: Insure the top of unit does no exceed 31” (785) from height of floor.

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 301-NL: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg. (23 lbs.)

Liner: 301-500: For code 301, 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

REVIT

Site Location: The 303 wall mounted waste receptacle is designed to conserve floor space in medium to light duty areas.

Materials: Garbage can has all steel construction that offers maximum fire protection with no openings on sides or bottom of unit.
Tight sealing head and spring loaded door promote oxygen starvation. When used with optional galvanized liner there is added insulative fire protection. Comes with standard bag holder apparatus.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.). Recommended bag size: 26″ x 36″

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site Location: This free standing waste container is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage  can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Garbage can comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Materials: All metal construction of outdoor garbage can, heavy gauge HRS. Rotationally moulded heavy duty plastic liner. Capacity 35 imp gal, 42 US gal, 160 litres.

Finish: RAL super durable TGIC-Free polyester powder coating.

Features: Side opening allows for easy and ergonomic access to waste receptacle liner. Hidden latch closing prevents unwanted access. Unique design part of family of new products which can be found at www.frostsitefurnishings.com. Clean detailing in a rugged practical application. Lid comes with five colour choices; blue, black, red, green, or yellow. Easy installation into any outdoor location with anchorable feet.

Dimensions: 28.5″ W x 23″ in diameter.

*Note: full customization available with minimum order requirements

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: The recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs or recycle programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 6-9” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422-70C:11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

REVIT

Site Location: The surface mounted vending machine line provides easy flexible mounting on any type of wall material or construction.

Materials / Features: Epoxy Finish: All welded construction of 20 and 22 gauge steel.  Door hinged with full length steel piano hinge and secured with two tumbler keyed locks.

Stainless steel: All welded stainless steel construction,20 & 22 gauge type 304 No. 4 brushed finish.  Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks.  All units have removable coin box with tumbler lock keyed different from door.  Interchangeable coinage mechanism for free, $.10, $.25, $.50 or $1.00 (coin) vending.

Capacity: 15 no. 4 napkin (11 no. 6), 22 standard tampon tubes.

Installation: Secure unit to wall through holes in the back of unit with the four mounting screws provided.  For barrier free mounting insure that the coin mechanism handle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction.

Features: Pivoting self closing lid.  French/English napkin disposal label is embossed on lid.

Materials, 620: All welded steel construction (22 ga.).
Pivoting door utilizes full length piano hinge.

Shipping weight: 1.8 kg. (4 lbs.) per unit.

Installation: Position cabinet 26″ (66 cm) from floor. Secure to wall using mounting holes and screws provided.
For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Overall dimensions: 8″W (20.3) x 13-1/4″H (33.6) x 4-1/2″D (11.4).

REVIT

Site Location: Ideal for high traffic areas requiring hands free operation.

Features: Door is opened when hand is placed within 4” (10 cm) of sensor in door opening area and remains open for 5 seconds there after. Counterbalanced door swings freely in the event of depleted or missing batteries.  Unit is powered by 4 “c” alkaline batteries (not included).  Battery life is 10,000 cycles, or 2 years.
Polyethylene leakproof liner capacity: 5.1 litres. (1.1 imp. gal.). The correct bag to fit in this unit has the dimensions of 10″L x 3 1/4″ W x 9″ H.

Materials: All metal construction, stainless steel cover all design.

Shipping weight: 8.5 lbs. (4 kg).

Installation: For unrestricted access, sensor area of unit to floor should not exceed 48″ (120 cm). Mounting screws and instructions included.

Site Location: Ideal for high traffic areas and multiple mirror mounting. Foam soaps reduce consumption and improve washing effectiveness. Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Foam quatity dispensed: 0.7-0.8 cc. Soap container capacity: 800 cc (29.5 ounces). Unit is powered by 4 “AA” alkaline batteries (not included). Battery life is 20,000 cycles or one year. Low battery indicator: flashes blue.

Shipping Weight: 1.25kg, 2.75 lbs, (bulk packed 12 units per case).

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7 cm). Ensure unit is mounted 20cm above any horizontal surface (30cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.

Site Location: ADA compliant no touch dispenser allows for vanity, easy reach, mounting. Foam soaps reduce consumption and improve washing effectiveness.

Features: Bulk loading refill capacity: 1.5 litres (50.7 fl. oz.). Dispensing volume: 1-1.5 ml (.034 – .051 fl. oz.). Viscosity range 1-3000 cp. Takes all foam suitable soaps. Activated sensor range: 3″-4″. LED indicators for low battery, empty soap, and wrong soap type. AC adaptor included, comes with 60″ (1.5 meter) cord.

Materials: Main housing is cast brass with polished chrome finish.

Batteries: Can take 4 AA Alkaline batteries (not included). Battery life: 20,000 cycles or 1 year.

Installation: 25mm (1″) Dia. Hole required. Comes with detailed installation instructions.

REVIT

Site Location: The 941 stock series mirror is ideal for any location with its vandal resistant three way concealed fastener mounting.

Features: One piece 24 ga. stainless steel channel frame provides rigid assembly.  Comes in bright annealed finish.  Vandal resistant concealed three way mounting.  Standard float glass with shock resistant primary back.  Full galvanized back panel.

Shipping Weight: Code 941-1824, 10 kg. (23 lbs.), shipped two per carton.

Installation:  Position bottom of mirror 48″ (121) from floor. Positions may vary depending on size and the type of installation.

Site Location: Ideal for pedestrian common areas.

Features: 18 gauge stainless steel (304, # 4 brushed finish).  Ashtray secured with tumbler keyed lock.
Door is hinged with full length stainless steel piano hinge.  Corrosion resistant galvanized steel (22 ga.) inner liner with baffle opening.   The liner capacity is 2.3 litres (0.5 gal.).

Shipping weight: 11 lbs.

Installation: For unrestricted access, height of cigarette inlet to floor must not exceed 48″ (121 cm) from floor.

REVIT

The Frost SP series stock grab bars are of an all stainless steel construction.

Snap flange is 12 gauge stainless with a full 360 degree bead weld to the 18 gauge stainless tubing. Features concealed mounting detailing as shown in illustration above.

Stainless steel 1-1/4″ diameter  Available in 12″, 16″, 18″, 24″, 30″, 32″, 36″, 42″ and 48″ lengths

REVIT

Site Location: These units are highly recommended by barrier-free design experts because they provide the optimum approach path for wheelchair use.  Consult applicable codes for specific requirements.

Features: Tubing is either 16 gauge type 304 1-1/4″ O.D. (outside diameter) stainless steel with exposed surfaces in polished satin finish or 16 gauge steel with white finish.  Swing up bar is only as strong as the wall and anchors to which it is attached.  Grab bar must be securely fastened  to wall  to withstand the load it is intended to support.  The Code 1055 series of bars will sustain loads of 250 lbs under it’s intended use. Units must be secured and anchored to wall or approved carrier according to installation specifications by a qualified tradesperson. Mandrel bending process on all curves maintains uniform bar diameter.  Grab bar is manually lowered to horizontal support position and raised for departure.  A locking system enables the flip up grab bar to be locked in either a horizontal or retracted position

Installation: Secure to wall where adequate in wall backing exists.  Use wall plate as a template to locate  mounting holes.  Drill holes and set anchors as appropriate.  Mount grab bar and secure mounting screws.  The 1055 flip up grab bar will sustain loads of 250 lbs. and greater. Also the types of loads (especially dynamic) applied are hard to predict. It’s up to the designer to determine the suitability of the use of these grab bars in this situation. Caution: The grab bar is only as strong as the anchors and wall to which it is attached and therefore must be firmly secured in order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.

See also, 1055-500 – Carrier Stand

REVIT

Compact flip up shower seat retracts out of way when not in use. One piece phenolic top, 5/16″ (8mm) thick. Unit frame is fabricated from 1″ O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish.

Installation: Mounting hole locations are for reference when providing in wall support. Mounting screws provided.

Materials: 3 hook strip is 22 ga. stainless steel type 304 # 4 finish.  Hook is epoxy coated 16 ga. stainless steel, providing a smooth burr free edge.  Alternative colours available on special order (5-6 week lead times may apply).  Spring loaded coat hook will only support weight of coat or jacket, heavier objects will slip off.  Collapsible coat hook will not support loads in excess of 11 kilograms (25 lbs.), patent pending.

Installation:  Secure to any panel with ss mounting screws provided. Screws are counter sunk ss with Phillips style finished head.  For unrestricted access, centre of unit to floor should not exceed 48″ (120). Mounting screws provided.

See also, 1150-3SS: Stainless steel hook on stainless steel strip (three hook strip).

Site Location: Ideal for areas with limited space requirements and installations promoting power conservation.

LEED Credits: Minimum energy performance: design and construction, EA prerequisite 2. Optimized energy performance: design and construction, EA Credit 1

Features: Blue L.E.D. Helps target ideal drying area. Drying time: 7-10 seconds. Outer casing is 16 ga. drawn steel with porcelain enameled finish. Stainless steel: 16 ga. Whole unit is rated at 1600 watts. Heating element is 900 watts. Dual ball bearings brush motor is 700W, 18000 R.P.M. The decibel reading at 1 meter is 78.

Operating Voltage: 110-120 Vac, 50/60Hz, 1.3 – 1.6 kw. Amps drawn: 14.5

Electrical Safety: Motor thermal protection: contains an auto resetting thermostat which turns the unit off at 105° C (221° F). Motor overload protection: motor assembly has a replaceable fuse. Heater thermal protection: An auto resetting thermostat turns the unit off at 85° C (185° F). Drip proof: IP X1; Isolation: Class 1.

Performance: Air speed output: 100 m/s (225 mi/hr). Sensor range: 7” (18cm).

Warranty: Complete 5 years from date of purchase.

Maintenance, Exterior: Unit may be cleaned with soap and water or approved cleaning products/sanitizers. Interior: Motor assembly and all working parts must be kept clean from excessive dirt/dust and any form of foreign debris. Failure to maintain unit may reduce performance and result in void of warranty.

Shipping Weight: 6.6ks (14.6 lbs)

Installation: Supplied with mounting template, instructions, screws and anchors.

REVIT

Site Location: These compact high speed hand dryers are ideal for renovations and areas with 15amp. circuits available. They are also more environmentally friendly due to less energy consumption.

LEED Credits: Minimum energy performance: design and construction, EA prerequisite 2.
Optimized energy performance: design and construction, EA Credit 1

Materials: Outer casing is 18 ga. drawn steel with white epoxy finish. Stainless steel: 18 ga.

Power Usage: Whole unit is rate at 1000 watts. Heating element: 500 watts. Operating Voltage: 110-120 Vac, 50/60Hz, 0.84 – 1kw. Amps 8.4. Brush motor with dual ball bearing 500w, 29,000 R.P.M.

Electrical Safety: Motor thermal protection: contains an auto resetting thermostat which turns the unit off at 105° C (221° F). Drip proof IP X1; Isolation: Class 1. Drying time: 10-12 seconds. Sound Level: 75 dB at 1 M. Sensor Range: 6” (15cm).

Performance: Air speed output: 90 m/s (201 mi/hr). Volume: 101.7 m3/h, (59.8 cfm). Air output temperature: 55 degrees C (131 deg, F)

Warranty: Complete 5 years from date of purchase.

Maintenance: Motor assembly and all working parts must be kept clean from excessive dirt/dust and any form for foreign debris. Failure to maintain unit may reduce performance and result in void of warranty.

Shipping Weight: 4.2kgs (9.2 lbs) 

Installation: Supplied with mounting template, instructions, screws and anchors.

51 imp gal., 61.25 US gal., 8.25 cu.ft., 234 litres.

Materials:

• All steel construction heavy gauge HRS, lid 16 gauge steel, body 18 gauge steel.
• Rotationally moulded polyethylene storage liner included.

Finish:

• RAL super durable TGIC-free polyester powder coating provides rust proof finish. Tested to survive harsh summer and winter weather.

Features:

• Storage container has a counterbalanced lid for safe opening and closing and easy access. Lockable attachment included.
• Sealed storage compartment helps extend the storage life of salt or sand. Holds up to 750 lbs. depending on material density.
• Storage container is also perfect for storing chemical supplies, industrial tools and equipment, and any other items that require a lockable heavy duty storage solution.
• Hidden feet allow unit to be anchored to ground.
• No assembly required.
• Unique design of the storage container is part of a family of integrated products.
• Clean detailing in a rugged practical application. Perfect for use at office buildings, schools, retail outlets, and other commercial properties requiring maximum durability and attractive looks.

Dimensions: 36″w x 27.75″h x 25.5″d
Installation: Holes provided for anchor mounting.
Warranty:  1 year warranty against defective workmanship

Common area bench, 4′

Materials:

• All steel construction of heavy 12 gauge HRS.

Finish:

• RAL super durable TGIC-free polyester powder coating provides rust proof finish. Tested to survive harsh summer and winter weather.

Features:

• Unique design of park bench is part of a family of integrated products.
• Clean detailing in a rugged practical application.
• Built in arm rests.  No assembly required.
• Ergonomic, with lumbar support.
• Feet allow unit to be anchored to ground.
• Stacked 3 high, for efficient and cost effective transport.
• Perfect for use at office buildings, schools, retail outlets, parks, sports facilities, and other commercial properties requiring maximum durability and attractive looks.

Dimensions:

• 2040, 4′: 48″w x 34″h x 25″d

Installation: Holes provided for anchor mounting.

Warranty : 1 year warranty against defective workmanship.

Bike Stop – Two Bike Rack

Materials:

• All steel construction heavy duty 12 gauge HRS.

Finish:

• RAL super durable TGIC-free polyester powder coating provides rust proof finish. Tested to survive harsh summer and winter weather.

Features:

• Two ring design perfect for city use.
• Square tube deters use of pipe cutters.
• Unique design of the bike rack is part of a family of integrated products.
• Clean detailing in a rugged practical application.
• Easy installation in any location.
• Surface or imbedded concrete mounting.
• Perfect for use at office buildings, schools, retail outlets, parks, sports facilities, and other commercial properties requiring maximum durability and attractive looks.

Dimensions: 12″w x 36″h x 4.6″d.
Installation: Holes provided for anchor mounting.
Warranty:  1 year warranty against defective workmanship.

Linguini 5 Bike Rack

Materials: 

• All steel construction, 3″ x 3/8″ HRS plate.

Finish:

• RAL super durable TGIC-free polyester powder coating provides rust proof finish. Tested to survive harsh summer and winter weather.

Features:

• Unique design of the bike rack is part of a family of integrated products.
• Clean detailing in a rugged practical application.
• Easy installation in any location.
• Perfect for use at office buildings, schools, retail outlets, parks, sports facilities, and other commercial properties requiring maximum durability and attractive looks.

Dimensions: 45″w x 30″h x 2″d.
Installation: Holes provided for anchor mounting.
Warranty:  1 year warranty against defective workmanship.

Surf 6 Bike Rack

Materials:

• All steel welded construction in heavy duty 11 & 12 gauge HRS.

Finish:

• RAL super durable TGIC-free polyester powder coating provides rust proof finish. Tested to survive harsh summer and winter weather.

Features:

• Unique design of the bike rack is part of a family of integrated products.
• Clean detailing in a rugged practical application.
• Easy installation in any location.

• Perfect for use at office buildings, schools, retail outlets, parks, sports facilities, and other commercial properties requiring maximum durability and attractive looks.

Dimensions: 32″w x 25.75″h x 27.75″d.
Installation: Holes provided for anchor mounting.
Warranty:  1 year warranty against defective workmanship.