Back to Shower Accessories

Stainless Steel Double Robe Hook

In Stock
MSRP: $29.00 Distributors may sell for less


Product Code: 1139-S
Product Name: Stainless Steel Double Robe Hook
Single Carton UPC: 624622113902
Single Carton Shipping Dimensions: 5.1cm L x 5.1cm W x 5.1cm H (2” L x 2” W x 2” H)
Single Carton Shipping Weight: 0.22kg (0.5 lbs)

Site Location

Frost’s 1139-S surface mounted robe hooks are often specified and designed for use in both commercial and residential settings. Typically, these coat hooks are used in schools/universities, recreation centres, hospitals, fitness facilities, office buildings, airports, and retail locations. This product offers a durable, professional, and easy to maintain solution for storing personal items.


  • Easy to install and maintain
  • Made from 16 gauge stainless steel
  • Smooth burr-free edges
  • Concealed mounting
  • Provides clean and professional appearance


  • 16 gauge stainless steel, type 304 brushed finish

Product Dimensions

  • 5.1cm L x 4.6cm W x 5.1cm H (2” L x 1.9” W x 2” H)

Product Weight

  • 0.2 kg (0.4 lbs)

Installation Guidelines

Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. (mounting bracket and screws provided).


Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners. For stainless steel please do not spray with any product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur. Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly maintain stainless steel items.


If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material and are not covered under warranty.

UX112-BF UX112-SF 0756-Z ASI0745-Z 7345 ASI7345 B672 B-672 672 6727 B6727 B-6727 7672 B7672 B-7672 76727 B76727 B-76727