Category: Disposals

Materials: All metal construction of outdoor garbage can, heavy gauge HRS. Rotationally moulded heavy duty plastic liner. Capacity 35 imp gal. 160 litres.

Finish: RAL super durable TGIC-Free polyester powder coating.

Features: Side opening allows for easy and ergonomic access to waste receptacle liner. Hidden latch closing prevents unwanted access. Unique design part of family of new products which can be found at www.frostsitefurnishings.com. Clean detailing in a rugged practical application. Lid comes with five colour choices; blue, black, red, green, or yellow. Easy installation into any outdoor location with anchorable feet.

Dimensions: 28.5″ W x 23″ in diameter.

*Note: full customization available with minimum order requirements

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 105 litres (28 US, 23 imp. gal.), shipping weight: 14 kg. (27lbs.)

Liner: 300-500: For code 300, 80 litres (21 US, 17.5 imp. gal.), Shipping weight 5.8 kg. (13 lbs.).
Dimensions: 31″ (78.7) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 301-NL: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg. (23 lbs.)

Liner: 301-500: For code 301, 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: This stainless steel garbage can is intended for areas where extra durability is required.  The medium unit will fit under most counter tops.

Features: Rounded soft edge design.  All welded construction of 22 gauge stainless steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  Comes with standard bag holder apparatus.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg.(23 lbs.)

Liner: Code 301-500: 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing recycling container can be positioned where ever recycling receptacles are required, including under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use where a recycle program is required.

Features: The recycling bin has a rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint (easily identifiable recycling blue colour) and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 80 litres (21 US,17.5 imp. gal.), shipping weight: 12 kg.(23 lbs.)

Optional Liner: Code 301-500: 64 litres  (19 US, 14 imp. gal.), Shipping weight 5.4 kg. (10 lbs.)
Dimensions: 25″ (63.5) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

Site Location: The Frost free standing series of waste containers can be used in almost any application.  The medium and small garbage cans fit under most counter tops.  The all metal construction is ideally suited to fire protection and rugged use.

Features: Rounded soft edge design.  All welded construction of 22 gauge cold rolled steel.  Optional light weight 26 gauge galvanized steel liner provides extra fire protection.  All units come with standard bag holder apparatus.  Finished in hybrid epoxy polyester powder paint and black vinyl trim.  Recessed feet elevate the unit to provide a neat appearance with minimal maintenance.  Packaged in corrugated cartons.

Capacity: 302-NL: 41 litres (11 US, 9 imp. gal.), shipping weight: 10 kg.(19 lbs.)

Liner: 302-500: For code 302, 41 litres (11 US, 9 imp. gal.), Shipping weight: 2.7 kg. (6 lbs.)
Dimensions: 16″ (40.6) x 12-1/2″ (54.6) x 12-1/2″ (54.6).

REVIT

Site Location: The 303 wall mounted waste receptacle is designed to conserve floor space in medium to light duty areas.

Materials: Garbage can has all steel construction that offers maximum fire protection with no openings on sides or bottom of unit.
Tight sealing head and spring loaded door promote oxygen starvation. When used with optional galvanized liner there is added insulative fire protection. Comes with standard bag holder apparatus.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.). Recommended bag size: 26″ x 36″

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site Location: The 303 wall mounted waste receptacle is designed to conserve floor space in medium to light duty areas.

Materials: Garbage can has all steel construction that offers maximum fire protection with no openings on sides or bottom of unit. Tight sealing head and spring loaded door promote oxygen starvation. When used with optional galvanized liner there is added insulative fire protection. Comes with standard bag holder apparatus.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.). Recommended bag size: 26″ x 36″

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted waste receptacle is designed to conserve floor space in medium to heavy duty areas.  All steel construction offers maximum fire protection with no openings on sides or bottom of unit.  Tight sealing head and spring loaded door promote oxygen starvation. Comes with standard bag holder apparatus.

Capacity/Shipping Weight: Garbage can has a capacity of 17 gal. (77 litres), shipping weight: 27 lbs. ( 12.2 kg.)

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted waste receptacle is designed to conserve floor space in medium to heavy traffic areas. Stainless steel construction offers added durability.

Features: Stainless steel construction offers maximum fire protection with no openings on sides or bottom of unit. Tight sealing head and spring loaded door promote oxygen starvation. 

Materials: Garbage can has double spring loaded door with full length piano hinge. Comes with standard bag holder apparatus.  20 ga. stainless steel type 304 body, 20 ga. Stainless steel head.

Capacity: 77 litres (17 gal.). Shipping weight: 12.2 kg (27 lbs.).

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site location: The 304 wall mounted recycling receptacle is designed to conserve floor space in medium to heavy duty areas.  All steel construction offers maximum fire protection with no openings on sides or bottom of unit.  Tight sealing head and spring loaded door promote oxygen starvation. Comes with standard bag holder apparatus.

Capacity/Shipping Weight: Recycle bin is 17 gal. (77 litres), shipping weight: 27 lbs. ( 12.2 kg.)

Installation: For barrier free mounting insure that centre of inlet door does not exceed 48″ (120 cm) above floor level.

Site Location: This free standing waste receptacle is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This stainless steel free standing waste receptacle offers maximum capacity with the quality and durability of an all stainless unit without the commitment of wall mounting. The 310J offers clean geometric design lines with radiused corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 20 ga. Stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 206 litres, (45.25 imp. gal., 54.5 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This free standing waste container is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage  can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Garbage can comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: This free standing waste receptacle is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas.

Features: Garbage can is all stainless steel construction, number 4 brushed finish.  Spun 18 ga. type 304 stainless steel top.  One piece roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.  Comes with standard bag holder apparatus.

Volume: 125 litres (27.5 Imp. gal., 33 gal. US).

Packaging: Shipped in a durable corrugated container. Body comes with a protective plastic to be removed after installation.

Site Location: Large capacity outdoor waste container.

Features: Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 non removable stainless steel top.  Roll formed 22 gauge stainless steel body garbage can.  22 ga. stainless steel spun bottom.

Volume: 27.5 imp gallons, 32 US, (125 litres).

Site Location: Large capacity outdoor ash bin and waste container.

Features: Four inch waste inlet opening.  Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body garbage can.  22 ga. stainless steel spun bottom.

Volume: 27.5 imp gallons, 32 US, (125 litres).

Site Location: Wall mounted outdoor waste receptacle.

Features: Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction outdoor garbage can.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.

Volume: 13.5 imp gallons, 16 US, (62 litres).

Shipping Weight: 25 lbs. (11.5 kg)

Installation: Insure top of unit does not exceed 48” (120) from floor level.

Site Location: Large capacity wall mounted ash bin and waste container.

Features: Four inch waste inlet opening.  Bag bracket holder apparatus for easy and secure support of plastic bags.  All stainless steel construction.  Spun 18 ga. type 304 stainless steel top.  Roll formed 22 gauge stainless steel body.  22 ga. stainless steel spun bottom.

Volume: Garbage can is 13.5 imp. gallons, 16 US, 62 litres.

Shipping Weight: 25 lbs. (11.5 kg).

Installation: Insure top of unit does not exceed 46” (117) from floor level.

Site location: Wall mounted recycling container fixed design eliminates the possibility of blocking exits in the event of an emergency.

Features: Flexible modular component design to accommodate specific separation requirements.
Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Two leak proof roto moulded polyethylene liners. Optional metal liners available on special order (Code 315-500G). Full length piano hinge on door. Magnetic latch on door. Assists commercial and institutional organizations with source separation programs or recycle programs. Each liner has a 67 litre capacity, 134 litres in total (29 imp. gal. In total).

Labels Included: Recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French.

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 50 lbs. (23 kg.)

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Since Frost manufactures on site, we are pleased to offer custom recycling inlet shapes and colours. These are available on special order and based on minimum order quantities (available in both the 316 and 315 models). Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: The recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs or recycle programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Minimum Order Quantity: On custom recycling units there is a minimum 24 unit order quantity with a 4-6 week lead time for delivery.

Shipping Weight: 75 lbs. (23 kg.)

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: The recycling bin comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs or recycle programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Site location:  Code 316 allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316.

Labels Included: Comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Site location:  Code 316 recycling container allows for flexible mounting locations in areas requiring three streams.

Features: Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation or recycle requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or chair. All exterior components are fabricated metal for maximum fire protection. Leak proof roto mouled polyethylene liners. Optional metal liner available on special order. (Code 315-500G). Full length piano hinge on doors. Magnetic latch on 315 door, keyed tumbler lock on Code 316 recycling bins.

Labels Included: Comes with Glass, Plastic, Cans, Trash, Cans/Plastic, Glass/Plastic, White Paper Only, Glass/Cans/Plastic, Paper, Trash/Organic and Organic labels in both English and French. Assists commercial and institutional organizations with source separation programs.

Capacity: each liner has a 67 litre capacity. Code 316: 201 litres in total (44 imp. gal. In total).

LEED: Checklist credit statement available at www.FrostPL.com.

Shipping Weight: 75 lbs. (23 kg.)

Site Location: Can be mounted to any wall with mounting bracket provided.

Features: Stainless steel construction of waste bin is best suited for high traffic areas. Garbage can is completely removable for convenient maintenance. Comes with standard bag holder apparatus. Code 327 provides extra large waste capacity. All stainless welded construction.

Capacity: Code 326: 11 gal. (50 litres), shipping weight: 20 lbs. ( 9 kg.) Code 327: 15 gal. (68 litres), shipping weight: 29 lbs. (13 kg.)

REVIT

Site Location: Semi recessed waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Features: All stainless welded construction with removable waste bin.  Semi recessed design provides large capacity garbage can with minimum space.  Code 337 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.

Materials: Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 11 gal. (50 litres), shipping weight: 20 lbs. (13kg.).

Installation: Provide wall opening 28-3/4″ (73.3)H x 16″ (40.6)W x 4″ (10.2) D. Mount recessed frame first, then insert waste bin using bracket provided. For barrier free mounting insure that top of waste receptacle does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Features: All stainless welded construction with removable waste bin.  Semi recessed design provides large capacity garbage can with minimum space.  Code 337 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.

Materials: Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 15 gal. (68 litres), shipping weight: 29 lbs. (13kg.)

Installation: Provide wall opening 28-3/4″ (73.3)H x 16″ (40.6)W x 4″ (10.2) D. Mount recessed frame first, then insert waste bin using bracket provided. For barrier free mounting insure that top of waste receptacle does not exceed 48″ (120 cm) above floor level.

REVIT

Site Location: Compact waste receptacle is ideal for low traffic areas.

Materials: Garbage can is heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with tumbler keyed lock. All doors are hinged with full length stainless steel piano hinges. Corrosion resistant galvanized steel (20 ga.).
Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge. Removable leak proof roto moulded liner with 22.5 litre capacity (5 Imp. gal., 6 gal. US).

Installation: Code 340A: Provide 37-3/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening. Code 340B: Provide 37-3/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.  Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.  Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required.  For unrestricted access, height of top of unit to floor must not exceed 63″ (160).

REVIT

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Universal towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).  Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform.

Features: Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, bottom of rough opening to floor must not exceed 6-1/2″ (16.5), this will result in sensor being 47″ (119.3 cm) or less from floor.

REVIT

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.
Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.
Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).
Secured with two tumbler keyed locks.
All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160).

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Paper towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).

Features: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform. Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening.
Drill mounting holes as required. For unrestricted access bottom of rough opening to floor must not exceed 25-3/4″ (65 cm), this will result in sensor being 47″ (119.3 cm) or less from floor.

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).

Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto mouded liner with 9.5 litre capacity (2.1 imp. gal., 2.5 US gallons).

Installation: Code 415A: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 415B: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).

REVIT

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.  Designed to dispense 500 multifold towels.  All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacities: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6kg.)  Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3kg.)  

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D.  Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of door does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth. Control dispenser reduces paper waste.

Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock. Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).

Materials: All stainless welded construction with locking removable waste bin.
Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that push lever does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422-70C:11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.  Designed to dispense 500 multifold towels.  All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacities: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D.  Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of door does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth. Control dispenser reduces paper waste.

Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock. Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).

Materials: All stainless welded construction with locking removable waste bin.
Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that push lever does not exceed 48″ (120 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

REVIT

REVIT

Site Location: Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction.

Features: Pivoting self closing lid.  French/English napkin disposal label is embossed on lid.

Materials, 620: All welded steel construction (22 ga.).
Pivoting door utilizes full length piano hinge.

Shipping weight: 1.8 kg. (4 lbs.) per unit.

Installation: Position cabinet 26″ (66 cm) from floor. Secure to wall using mounting holes and screws provided.
For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Overall dimensions: 8″W (20.3) x 13-1/4″H (33.6) x 4-1/2″D (11.4).

Code 621 is a case of 500 disposable wax paper bag liners designed for code 620 and 622 feminine napkin disposals.

621 Bag Size: 10 1/4″ long x 7″ wide x 4″ open span.

REVIT

Site Location: Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction.

Features: Pivoting self closing lid.  French/English napkin disposal label is embossed on lid.

Materials, 622: All welded stainless steel construction (22 ga.).
Pivoting door utilizes full length stainless steel piano hinge.

Shipping weight: 1.8 kg. (4 lbs.) per unit.

Installation: Position cabinet 26″ (66 cm) from floor.
Secure to wall using mounting holes and screws provided.
For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Overall dimensions: 8″W (20.3) x 13-1/4″H (33.6) x 4-1/2″D (11.4).

REVIT

Site Location: Ideal for high traffic areas requiring hands free operation.

Features: Door is opened when hand is placed within 4” (10 cm) of sensor in door opening area and remains open for 5 seconds there after. Counterbalanced door swings freely in the event of depleted or missing batteries.  Unit is powered by 4 “c” alkaline batteries (not included).  Battery life is 10,000 cycles, or 2 years.
Polyethylene leakproof liner capacity: 5.1 litres. (1.1 imp. gal.)

Materials: All metal construction, stainless steel cover all design.

Shipping weight: 8.5 lbs. (4 kg).

Installation: For unrestricted access, sensor area of unit to floor should not exceed 48″ (120 cm). Mounting screws and instructions included.

REVIT

Site Location: Recessed coverall door napkin disposal can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: All stainless waste bin.  Coverall door design.  Recessed clean easy grip handle. Waste bin completely removable for convenient maintenance.  Leak proof rotationally moulded plastic bin.  Plastic bin is completely removable.  Door is self closing counter balanced and secured to recessed body.  Recessed body is made of corrosion resistant galvanized steel.

Shipping weight: Shipping weight 2.5 Kg (6 lbs.) per unit.

Installation: Provide wall opening 5-7/8″ (15) wide x 9″ (23) high x 4″ (10) deep.
Drill mounting holes in wall box as required.  Insure top of unit, when mounted, does not exceed 48″ (120) from floor level.  Apply English/French “Napkin Disposal” label to lower front of unit.

Site Location: The Code 640 unit is designed for use with standard partition systems with one unit serving two compartments. The same unit is used for end wall mounting when there is an odd number of compartments.

Features: One unit serves two compartments.  Removable leak proof plastic waste bin for easy maintenance.  Bin capacity: 5 litres (1 imp. gallon, 1.3 US gallons).  Waste bin removable from one side.  Self closing inlet doors. Comes with English / French labels.  Full length stainless steel piano hinges.  All welded stainless steel construction, 22 gauge type 304 No. 4 brushed finish.

Installation: Provide wall opening 11-1/8”W (28.5) x 15-3/8”H (39.2), end wall installation requires 3″ of depth (7.6). Secure to opening through mounting holes provided.  Position top edge of unit 26″ (66) from floor. For barrier free mounting insure that top of unit does not exceed 48″ (120 cm) above floor level.

Site Location: The 908 is intended for use in less frequented areas.

Features: Heavy duty all stainless ashtray is ideal for pedestrian common areas.  18 gauge stainless steel, 304, # 4 brushed finish (18 and 20 ga. on Code 908).  Secured with tumbler keyed lock.  Door is hinged with full length stainless steel piano hinge.  Offset mounting bracket keeps unit 5/8″ away from wall for extra fire insulation.  Corrosion resistant galvanized steel (22 ga.) inner liner with baffle opening.

Liner Capacity: 1 litre (.25 gal.)

Shipping weight: 11 lbs. (5 kg.), Code 908: 4lbs. (1.8 kg.).

Installation: For unrestricted access, height of cigarette inlet to floor must not exceed 48″ (121 cm) from floor.

Site Location: Ideal for pedestrian common areas.

Features: 18 gauge stainless steel (304, # 4 brushed finish).  Ashtray secured with tumbler keyed lock.
Door is hinged with full length stainless steel piano hinge.  Corrosion resistant galvanized steel (22 ga.) inner liner with baffle opening.  Offset mounting bracket keeps unit 5/8″ away from wall for extra fire insulation. The liner capacity is 2.3 litres (0.5 gal.).

Shipping weight: 11 lbs.

Installation: For unrestricted access, height of cigarette inlet to floor must not exceed 48″ (121 cm) from floor.

Site Location: The 909-100 pedestal is intended for use with the code 909 ash bin to allow for floor mounting where wall mounting is impractical.

Materials: Vertical support shall be 2″ x 2″ crs tubing (14 ga.).  Ash bin mounting plate shall be 1/8″ crs plate.  Floor mounting plate shall be 1/4″ crs plate.  All welded construction.

Shipping weight: 18 lbs.

Installation: Secure ashtray stand to floor with appropriate anchoring system for floor material. Use floor plate as a template to locate mounting holes. Drill holes and set anchors as required.