Category: Dispensers

Close
Frost 101 - Universal Towel Dispenser

White epoxy powder finish.

Product Number: 101


Specifications:

REVIT

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).

 


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 101-1 - Universal Towel Dispenser

White epoxy powder finish with lock

Product Number: 101-1


Specifications:

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 101J - Jumbo Roll Towel Dispenser

White epoxy powder finish

Product Number: 101J


Specifications:

Site location: The 101 series of dispensers are an industry standard and can be used in any room or site location. The 101J offers maximum towel capacity in a compact unit.

Dispensing: Universal paper towel dispenser will accept all standard roll towels (max. 7-1/4″ diameter and up to 10″ long). This includes almost all 425 ft. jumbo rolls and the Scott 500 ft. rolls.

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Jumbo roll is suspended on a non removable towel support bar.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access bottom of unit to floor must not exceed 44″ (111.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 102 - Universal Towel Dispenser

Polished chrome finish For polished chrome finish with lock, order product code 102-1

Product Number: 102


Specifications:

REVIT

Also available with lock – under product code 102-1

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 103 - Universal Towel Dispenser

Stainless steel type 304 No. 4 brushed finish

Product Number: 103


Specifications:

REVIT

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 103-1 - Universal Towel Dispenser

Stainless steel type 304 No. 4 brushed finish with lock

Product Number: 103-1


Specifications:

Site Location: The 101 series of dispensers are an industry standard and can be used in any room or site location.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels (max. 6″ diameter and up to 10″ long).  Available with keyed tumbler lock to reduce pilferage and vandalism.

Features: Front loading for easy service and maintenance.  All welded construction of 20 and 22 gauge steel.  Full length piano hinge on door.

SS features: Drawn stainless steel door.  All welded stainless steel (304, No. 4 brushed) construction.  All doors are hinged with full length stainless steel piano hinges.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2.5 kg. (5-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 105 - Multifold and "C" fold Towel Dispenser

White powder coat finish.

Product Number: 105


Specifications:

REVIT

Site Location: The compact size and variety of finishes makes the 105 and 107 ideal for use in any room or site location.

Dispensing: The paper towel dispenser opening will dispense multifold and “C” fold towels.

Features: Towel opening has rolled safety edge (black finish on all units).  All units come with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.

SS features: One piece coverall door.  Stainless steel (304, No. 4 brushed) construction.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2 kg. (4-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 48″ (120).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 107 - Multifold and "C" fold Towel Dispenser

Stainless steel, type 304, no. 4 finish.

Product Number: 107


Specifications:

REVIT

Site Location: The compact size and variety of finishes makes the 105 and 107 ideal for use in any room or site location.

Dispensing: The paper towel dispenser opening will dispense multifold and “C” fold towels.

Features: Towel opening has rolled safety edge (black finish on all units).  All units come with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.

SS features: One piece coverall door.  Stainless steel (304, No. 4 brushed) construction.  Product shipped with protective plastic coating to be removed after installation.

Shipping Weight: 2 kg. (4-1/2 lbs.)

Installation: For unrestricted access, bottom of unit to floor must not exceed 48″ (120).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109-50P - Control Roll Towel Dispenser

Smoked polycarbonate cover with metal back.

Product Number: 109-50P


Specifications:

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of paper towel dispenser.

Code 109-50P: Tough polycarbonate vandal resistant smoked transparent door.

Shipping Weight:  7 lbs. (3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109-50S - Control Roll Towel Dispenser

Stainless steel, 304 no. 4 finish

Product Number: 109-50S


Specifications:

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the paper towel dispenser.

Code 109-50S: All welded construction of 22 gauge no. 4 brushed finish stainless steel.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109 - 50W - Control Roll Towel Dispenser

White epoxy powder finish

Product Number: 109-50W


Specifications:

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-50 is designed to dispense Jumbo 8″ diameter (4″ reserve roll) x 8″ wide roll towels.  Controlled delivery is easy with push action lever.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the paper towel dispenser.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 109-60 - small

Stainless steel, no. 4 finish Mechanical Hands-free dispenser

Product Number: 109-60S, 109-60W, 109-60P


Specifications:

Site location: Ideal for high traffic areas

Dispensing: When pulling on exposed length of towel the touch free paper towel dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for next dispensing action. This hands free mechanical dispenser reduces paper flow and provides maximum hygiene. Designed to dispense jumbo roll towels with a maximum diameter of 8″. Comes with keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance.

Code 109-60S: all welded construction of 22 gauge no. 4 brushed finish stainless steel.

Code 109-60W: White epoxy powder finish.

Code 109-60P: Smoked polycarbonate cover.

Shipping weight: 13.5lbs (6 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 43″ (109.2 cm). Mounting screws provided.

 


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 109-60w

Mechanical Hands Free Towel Dispenser, Surface Mounted, White Epoxy Finish

Product Number: 109-60W


Specifications:

Site location: Ideal for high traffic areas

Dispensing: When pulling on exposed length of towel the touch free paper towel dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for next dispensing action. This hands free mechanical dispenser reduces paper flow and provides maximum hygiene. Designed to dispense jumbo roll towels with a maximum diameter of 8″. Comes with keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance.

Code 109-60S: all welded construction of 22 gauge no. 4 brushed finish stainless steel.

Code 109-60W: White epoxy powder finish.

Code 109-60P: Smoked polycarbonate cover.

Shipping weight: 13.5lbs (6 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 43″ (109.2 cm). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109-70P - Hands Free Roll Towel Dispenser

Smoked polycarbonate cover with metal back.

Product Number: 109-70P


Specifications:

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of the touchless paper towel dispenser.

Tough polycarbonate vandal resistant smoked transparent door.

Shipping Weight:  7 lbs. (3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109-70S - Hands Free Roll Towel Dispenser

Stainless steel, 304 no. 4 finish

Product Number: 109-70S


Specifications:

REVIT

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Paper towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of touchless paper towel dispenser.

Code 109-70S: All welded construction of 22 gauge no. 4 brushed finish stainless steel.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 109-70W - Hands Free Roll Towel Dispenser

White epoxy powder finish

Product Number: 109-70W


Specifications:

REVIT

Site location:  All metal construction is ideal for high traffic areas where vandalism is a concern.

Dispensing:  The 109-70 is designed to dispense Jumbo 8″ diameter (2-1/2″ reserve roll) x 8″ wide roll towels. Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel.

Features: Paper towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance of touchless paper towel dispenser.

Shipping Weight: 12 lbs. (5.3 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 126 - Paper Towel Dispenser

Polished chrome finish

Product Number: 126


Specifications:

Site location: Ideal for medical offices first aid and lunch rooms.

Features: All welded construction 18 gauge steel.  Tension springs restrict paper consumption.  Pivot arm hinged on hardened steel rivets.  Concealed locking device prevents pilferage and vandalism.  Designed to dispense standard 11″ rolls.

Shipping weight: 2 lbs. (.9 kg).

Installation: Position bottom of fixture 48″ 122 cm from floor. Secure to wall through mounting holes using screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 135 - Recessed Towel Dispenser

135A: Stainless type 304 fully-recessed 135B: Stainless type 304 semi-recessed 135C: Stainless type 304 surface mounted 135D: Stainless type 304 fully recessed 4-1/2" deep (dispenses multifold towels only)

Product Number: 135


Specifications:

Site Location: Compact fixture is well suited for multiple mountings in large high traffic areas and an ideal companion to stand alone or wall mounted waste receptacles.

 

Dispensing: Universal towel dispenser will accept all standard multifold and roll towels.

Features: Stainless steel (304, # 4 brushed) safety guarded saw tooth cutting bar. Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with a tumbler keyed lock.  Door is hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel recessed body.

Installation: Code 135A: Provide 18-1/4″ (46.5) high x 12-1/2″ (31.8) wide x 6″ (15.2) deep wall opening.  Code135B: Provide 18-1/4″ (46.5) high x 12-1/2″ (31.8) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required.  For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 135-50 - Recessed Control Roll Towel Dispenser

Code 135A-50: Stainless type 304, fully recessed Code 135B-50: Stainless type 304, semi recessed Code 135C-50: Stainless type 304, surface mounted

Product Number: 135-50


Specifications:

REVIT

Site Location: Extra deep fixture is ideal for high traffic areas.

Dispensing: Universal towel dispenser will accept all standard 8″ wide roll towels.  Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.

Materials: Stainless steel (safety guarded) saw tooth cutting bar.
Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with tumbler keyed lock. Door is hinged with full length stainless steel piano hinge.  Recessed body is corrosion resistant galvanized steel (20 ga.).

Installation: Provide 24-5/8″ (62.5) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160), this results in the push bar lever being 47″ (119.3 cm) or less from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 135-70 - Recessed Hands Free Roll Towel Dispenser

Code 135A-70: Stainless type 304, fully recessed Code 135B-70: Stainless type 304, semi recessed Code 135C-70: Stainless type 304, surface mounted

Product Number: 135-70


Specifications:

Site location: Extra deep fixture is ideal for high traffic areas.

Dispensing: Universal touchless paper towel dispenser will accept all standard 8″ wide roll towels.  Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.

Door: Heavy duty 18 gauge stainless steel door (304, #4 brushed finish). Secured with tumbler keyed lock.

Hinges: Door is hinged with full length stainless steel piano hinge.

Recessed Body: Corrosion resistant galvanized steel (20 ga.).

Installation: Provide 24-5/8″ (62.5) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening.  Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160cm) (or bottom of rough opening 38″ (96.5cm) from floor), this results in the sensor area being 47″ (119.3 cm) or less from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
146

Single roll, finished in polished chrome

Product Number: 146


Specifications:

Site Location: Ideal for areas requiring a heavy duty economical dispenser.
Tension springs restrict paper consumption to prevent free wheeling of roll.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance.  All welded construction of 18 ga. steel.  Pivot arms hinged on hardened steel rivets.  Tension springs reduce paper consumption and stops free wheeling.  All surfaces finished in polished chrome.

Shipping Weight: .45 kg (1 lb.)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7).
Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 150 - Roll Toilet Tissue Dispenser

Double roll, finished in polished chrome

Product Number: 150


Specifications:

Site Location: Ideal for areas requiring a heavy duty economical dispenser.
Tension springs restrict paper consumption to prevent free wheeling of roll.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance.  All welded construction of 18 ga. steel.  Pivot arms hinged on hardened steel rivets.  Tension springs reduce paper consumption and stops free wheeling.  All surfaces finished in polished chrome.

Shipping Weight: .9kg (2 lbs.)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7).
Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
frost_156 - 500x500

156S - Single roll, stainless steel type 304 no. 4 finish 158S - Double roll, stainless steel type 304 no. 4 finish

Product Number: 156S, 158S


Specifications:

Specifications:

Site Location: The hooded tissue dispensers offer an attractive means of preventing product pilferage and restricting paper consumption.

Dispensing: Roll tissue dispensers are standard Frost codes 146 (single) and 150 (double).

Features: Sloped hood has tumbler keyed lock to prevent theft and vandalism. Front loading for easy service and maintenance. All welded construction of 22 gauge stainless steel. Pivoting front hinged on hardened steel rivets.

Shipping weight: 156S – .9kg (2lbs), 158S – 1.3kg (3lbs).

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.

 


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
frost_158_10 - 500x500

158-10 - Stainless steel type 304, no. 4 finish.

Product Number: 158-10


Specifications:

Specifications:

Site Location: Shelf toilet tissue dispenser provides a convenient area for users to place articles such as bags or purses.

Features: New rounded safety edge detailing. Shelf and back formed from 22 gauge stainless steel no. 4 brushed finish. Comes complete with double roll toilet tissue dispenser. Toilet tissue dispenser has concealed locking device. Dispenser finish is polished chrome, see Frost code 150 PDF.

Shipping weight: 5lbs (2.25kg)

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
frost_158 - 500x500

158S - Double roll unit, stainless steel type 304 no. 4 finish.

Product Number: 158S


Specifications:

Specifications:

Site Location: The hooded tissue dispensers offer an attractive means of preventing product pilferage and restricting paper consumption.

Dispensing: Roll tissue dispensers are standard Frost codes 146 (single) and 150 (double).

Features: Sloped hood has tumbler keyed lock to prevent theft and vandalism. Front loading for easy service and maintenance. All welded construction of 22 gauge stainless steel. Pivoting front hinged on hardened steel rivets.

Shipping weight: 156S – .9kg (2lbs), 158S – 1.3kg (3lbs).

Installation: For unrestricted access the bottom of the dispenser to the floor should not exceed 44″ (111.7cm). Mounting screws are provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 159 - Roll Toilet Tissue Dispenser

Vertical double roll in white epoxy finish

Product Number: 159


Specifications:

Site location: Ideal for areas requiring a heavy duty economical dispenser. Semi-concealed top promotes the use of one roll at a time.

Dispensing: Dispenses all standard toilet tissue rolls including 4.2″ x 4.5″, 500 sheet rolls.

Features: Toilet paper holder has a capacity of two rolls per unit.  Comes with keyed tumbler lock to prevent pilferage and vandalism.  Front loading for easy service and maintenance.  Tissue rolls are not removable without keyed access.  Welded construction of both 18 ga. (front) and 20 ga. (back) cold rolled steel.  Body secured to back with full length piano hinge.

Shipping Weight: 1.35 kg. (3 lbs.)

Installation: For unrestricted access, bottom of top roll to floor should not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 1600 - Hand Sanitizer Stand

1600: Sanitizing dispenser stand, silver epoxy finish. 1600-500: Waste container and mounting bracket.

Product Number: 1600


Specifications:

Base and upright tube are one piece all welded construction (18 ga. cold rolled steel) with a silver powder coated finish. Mounting plate is 12 ga. crs in a white epoxy coated finish. A 7″ x 7″ (18 x18cm) area on the mounting plate can be used for promotional or instruction signage.
The optional waste container on the Code 1600-501 is made of a rotationally moulded polyethylene and is leak proof.

Mounting screws included:
Two (2) 10-24 unc machine screws (Phillips head) to secure dispenser to mounting plate
One (1) 5/16-18 unc machine screw (Phillips head) to secure mounting plate to tube support


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 1600-500 - Hand Sanitizer Stand

1600-500: Additional mounting plate to produce a double dispenser unit. 1600-501: Waste container and mounting bracket.

Product Number: 1600-500


Specifications:

Base and upright tube are one piece all welded construction (18 ga. cold rolled steel) with a silver powder coated finish. Mounting plate is 12 ga. crs in a white epoxy coated finish. A 7″ x 7″ (18 x18cm) area on the mounting plate can be used for promotional or instruction signage.
The optional waste container on the Code 1600-501 is made of a rotationally moulded polyethylene and is leak proof.

Mounting screws included:
Two (2) 10-24 unc machine screws (Phillips head) to secure dispenser to mounting plate
One (1) 5/16-18 unc machine screw (Phillips head) to secure mounting plate to tube support


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 165 - Multi-Roll Toilet Tissue Dispenser, Reserve Roll

304 Stainless Steel, No. 4 Finish

Product Number: 165


Specifications:

REVIT

Site Location: Ideal for areas requiring a heavy duty efficient dispenser.
The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.  This insures that the custodian is replacing empty rolls only and not having to deal with two half empty rolls during maintenance rounds.

Dispensing: Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.  All stainless steel unit, welded construction of both 18 and 20 gauge SS.

Shipping Weight: 2.4 kg ( 5.5 lb.).

Installation: For unrestricted access, bottom of unit to floor must not exceed 44″ (111.7). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 165DP - Multi-Roll Toilet Tissue Dispenser, Reserve Roll

Two compartment mounting of multi-roll toilet tissue dispenser with reserve roll. Stainless steel finish.

Product Number: 165DP


Specifications:

Site Location: Ideal for areas requiring space savings. The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.

165 Dispensing: Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.  Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.

Materials: Frame is all stainless steel one piece, welded construction of 22 gauge ss.

Installation: For unrestricted access, bottom of rough opening to floor should not exceed 44″ (111.7). Provide rough opening 12-1/2″ high x 12-3/8″ wide. Attach frames to partition, when secure slip toilet tissue unit through frame and secure to back of frame with mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
165R - Multi-Roll Toilet Tissue Dispenser, Reserve Roll

304 Stainless Steel, No. 4 finish, recessed

Product Number: 165R


Specifications:

Site Location: Ideal for areas requiring a heavy duty efficient dispenser. The code 165 reserve a roll dispenser will only dispense its reserve second roll after the first roll is empty.

Dispensing:  Dispenses all standard toilet tissue rolls.  Capacity of two rolls per unit.  

Features: Comes with keyed tumbler lock to reduce pilferage and vandalism.  Front loading for easy service and maintenance.  Rollers are non removable without keyed access.  All stainless steel unit, welded construction of both 18 and 20 gauge SS.

Recessed frame: All stainless 22 gauge type 304 number 4 finish.

Shipping Weight: 4 kg. (10 lbs.)

Installation: For unrestricted access, bottom of rough opening to floor should not exceed 44″ (111.7). Provide rough opening 12-3/8″ high x 6-3/8″ wide x 3-3/4″ deep. Attach backing to vertical members to depth shown above, slip toilet tissue unit through rough opening and secure to backing with mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 166 - Jumbo Toilet Tissue Dispenser

White epoxy finish, 10" roll max. with 2-1/4 to 3" spindle dia.

Product Number: 166


Specifications:

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive all metal keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 3 lb. (1.4 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost_166S

Stainless steel 10" roll max. with 2-1/4 to 3" spindle dia.

Product Number: 166S


Specifications:

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive stainless steel keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 3 lb. (1.4 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 168 - Jumbo Toilet Tissue Dispenser

White epoxy finish, 13" roll max. with 2-1/4 to 3" spindle dia.

Product Number: 168


Specifications:

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive all metal keyed lock package.  Welded all steel construction offers maximum fire protection.

Shipping Weight: 4 lbs., (2 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost_166S

Stainless steel 13" roll max. with 2-1/4 to 3" spindle dia.

Product Number: 168S


Specifications:

Site location: Ideal for high traffic areas prone to vandalism.

Features: Wall mounted single roll dispenser offers durability in an attractive stainless steel keyed lock package.  Welded all steel construction offers maximum fire protection. Holds 13″ jumbo roll.

Shipping Weight: 4 lbs., (2 kg)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (112). Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 169 - Jumbo Toilet Tissue Dispenser, Two Rolls

Twin Jumbo Toilet Tissue Dispenser, stainless steel, 304 no. 4 finish.

Product Number: 169


Specifications:

REVIT

Site location: Ideal for high traffic areas requiring the durability of an all metal exterior.

Dispensing: Holds two 9” (230mm) jumbo toilet tissue rolls. Moulded spindles can accommodate 2-1/4” or 3” (57 or 76mm) diameter cores. Spring loaded access tray will lock into position only when first roll on left side is depleted. When door is opened, access tray will return to original position. The custodian can then place the stub roll on the left side (default open position) and a full 9” roll in the blocked right side of the unit.

Materials: Door is drawn 18 ga. ss type 304 with brushed finish. Single viewing slot reveals tissue.
Equipped with tumbler lock.

Installation: Recommended mounting height for double roll dispenser: Insure the top of unit does no exceed 31” (785) from height of floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 170 - Jumbo Toilet Tissue Dispenser, Two Rolls

Twin Jumbo Toilet Tissue Dispenser, epoxy white finish

Product Number: 170


Specifications:

Site location: Ideal for high traffic areas requiring the durability of an all metal exterior.

Dispensing: Holds two 9” (230mm) jumbo toilet tissue rolls. Moulded spindles can accommodate 2-1/4” or 3” (57 or 76mm) diameter cores. Spring loaded access tray will lock into position only when first roll on left side is depleted. When door is opened, access tray will return to original position. The custodian can then place the stub roll on the left side (default open position) and a full 9” roll in the blocked right side of the unit.

Materials: Door is drawn 18 ga. crs with epoxy coated finish. Viewing slot reveals tissue quantity.
Equipped with tumbler lock.

Installation: Recommended mounting height for double roll dispenser: Insure the top of unit does no exceed 31” (785) from height of floor. See front view for mounting hole locations.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 175 - Facial Tissue Dispenser, recessed

Recessed mounting, polished chrome finish

Product Number: 175


Specifications:

Site location: Ideal for areas where the dispensing of standard or quality facial tissues is required. Face plate manufactured from 20 ga. steel.

Features: Die formed safety edge on diamond shaped opening allows easy removal of facial tissue.  Recessed body is die formed from 20 ga. corrosion resistant galvanized steel.
Slide catches secure face plate to recessed body.

Shipping Weight: 2 lbs. (.9kg)

Installation: Provide wall opening 11-1/4″ wide (13.4cm) x 5-1/4″ high (13.4cm) x 2-1/4″ deep (5.7cm). Secure recessed body to wall using mounting screws provided. Individually packaged.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 180 - Facial Tissue Dispenser

Surface Mounted, polished chrome finish

Product Number: 180


Specifications:

Site Location: Ideal for areas where the dispensing of standard or quality facial tissues is required.

Features: One piece face plate and back manufactured from 20 ga. steel. Die formed safety edge on diamond shaped opening allows easy removal of facial tissue. Front pivots open on steel rivets for easy access and loading. Front secured with “P” keyed lock to prevent theft.

Shipping Weight: 2 lbs. (.9kg)

Installation: Position in desired location and secure to wall. Mounting screws provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 185 - Paper Cup Dispenser

185: White epoxy powder finish 187: Stainless steel type 304, no. 4 brushed finish

Product Number: 185


Specifications:

Materials: Body and back formed from 22 ga. steel. Body hinged on hardened steel rivets pivoting forward for easy loading and maintenance.  Level gauge slot on front of unit. Friction catch to secure unit in closed position.  Designed to dispense standard 4 oz. rolled edge regular and cone cups.

Shipping Weight: 2 lbs. (.9 kg)

Installation: Position bottom of fixture 48″ (122cm) from floor. Secure to wall using screws and mounting holes provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 187 - Stainless Paper Cup Dispenser

Stainless steel type 304, no. 4 brushed finish

Product Number: 187


Specifications:

Materials: Body and back formed from 22 ga. steel. Body hinged on hardened steel rivets pivoting forward for easy loading and maintenance.  Level gauge slot on front of unit. Friction catch to secure unit in closed position.  Designed to dispense standard 4 oz. rolled edge regular and cone cups.

Shipping Weight: 2 lbs. (.9 kg)

Installation: Position bottom of fixture 48″ (122cm) from floor. Secure to wall using screws and mounting holes provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 195 - Table Napkin Dispenser

195C: Napkin dispenser, stainless steel bright finish 195B: Napkin dispenser, black finish 195W: Napkin dispenser, white finish

Product Number: 195


Specifications:

Site Location: Economical table napkin dispenser comes in three finishes to suit both institutional and commercial applications. Note: Code 195B and Code 195W are special order, minimum quantity of 50 units required.

Dispensing: Will accept all standard napkins.

Features: One piece die formed body of 22 gauge steel with slightly radiused corners. Spring loaded pressure plates provide consistent dispensing of napkins. Dual sided dispensing. Rubber feet to protect countertops.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 199-R - Toilet Seat Cover Dispenser

199-R: Recessed, stainless steel 199-2500: half fold seat covers, green seal. Packed 2,500 / case (10 sleeves of 250) 199-5000: half fold seat covers, green seal. Packed 5,000 / case (20 sleeves of 250)

Product Number: 199-R


Specifications:

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 199S - Toilet Seat Cover Dispenser

199S: Surface mounted, Stainless steel 199- 2500: half fold seat covers, green seal. Packed 2,500 / case (10 sleeves of 250) 199-5000: half fold seat covers, green seal. Packed 5,000 / case ( 20 sleeves of 250)

Product Number: 199S


Specifications:

Site Location:

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 199-W - Toilet Seat Cover Dispenser

199-W: Surface mounted, white finish 199-2500: half fold seat covers, green seal. Packed 2,500 / case (10 sleeves of 250) 199-5000: half fold seat covers, green seal. Packed 5,000 / case (20 sleeves of 250)

Product Number: 199-W


Specifications:

Site Location:

Features CRS: All welded construction of 22 gauge crs.  Door secured with keyed tumbler lock.

Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.  Full length stainless steel piano hinge on door.  One piece frame on recessed unit with rigid 1/4″ return on sides.

Shipping Weight: 6 lbs. (2.8 kg)

Installation: For unrestricted access, top of unit to floor does not exceed 48″ (120).  For recessed units provide rough opening: 16″ W (40.6) x 11-1/8″ H(28.2) x 1-5/8″ D(4.1).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 400-14A - Combination Dispenser/Disposal Fixtures

400-14A: Stainless type 304 fully recessed 4-1/2" deep (dispenses multifold towels) 400-14C: Stainless type 304 surface mounted 4-1/2" deep (dispenses multifold towels)

Product Number: 400-14A


Specifications:

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 400-50 - Combination Control Roll Dispenser / Disposal Fixture

400A-50: Stainless type 304, large capacity, fully recessed 400B-50: Stainless type 304, large capacity, semi recessed 400C-50: Stainless type 304, large capacity, surface mounted

Product Number: 400-50


Specifications:

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.  Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.  Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required.  For unrestricted access, height of top of unit to floor must not exceed 63″ (160).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 400-70 - Combination Hands Free Dispenser / Disposal Fixture

400A-70: Stainless type 304, fully recessed, extra large capacity 400B-70: Stainless type 304, semi recessed, extra large capacity 400C-70: Stainless type 304, surface mounted, extra arge capacity

Product Number: 400-70


Specifications:

REVIT

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Universal towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).  Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform.

Features: Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 47 litre capacity (10.5 gallons).

Installation: Provide 56-3/8″ (148.3) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, bottom of rough opening to floor must not exceed 6-1/2″ (16.5), this will result in sensor being 47″ (119.3 cm) or less from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 400A - Combination Dispenser/Disposal Fixtures

400A: Stainless type 304 fully recessed 400B: Stainless type 304 semi recessed 400C: Stainless type 304 surface mounted 400PL: Solid core plastic laminate fully recessed

Product Number: 400A


Specifications:

REVIT

Site Location: Our largest combination fixture is ideal for high traffic areas.  

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto moulded liner with 32 litre capacity (7 gal. imp., 8.5 gal. US).

Installation: Code 400A: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.
Code 400B: Provide 56-3/8″ (148.3) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening. Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 62″ (157.5), or bottom of rough opening must not exceed 5” (13 cm) in height from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 410-14A - Combination Dispenser/Disposal Fixtures

410-14A: Stainless type 304 fully recessed 4-1/2" deep (dispenses multifold towels) 410-14C: Stainless type 304 surface mounted 4-1/2" deep (dispenses multifold towels)

Product Number: 410-14A


Specifications:

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 410-50 - Combination Control Roll Dispenser / Disposal Fixture

410A-50: Stainless type 304, fully recessed 410B-50: Stainless type 304, semi recessed 410C-50: Stainless type 304, surface mounted

Product Number: 410-50


Specifications:

Dispensing: Universal paper towel dispenser will accept all standard 8″ roll towels.
Controlled delivery with easy push action lever, takes up to 4″ diameter reserve roll to eliminate paper towel waste.
Stainless steel (safety guarded) saw tooth cutting bar.

Door: Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).
Secured with two tumbler keyed locks.
All doors are hinged with full length stainless steel piano hinges.

Waste Inlet: Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.

Liner: Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 63″ (160).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 410-70 - Combination Hands Free Dispenser / Disposal Fixture

410A-70: Stainless type 304, fully recessed, large capacity 410B-70: Stainless type 304, semi recessed, large capacity 410C-70: Stainless type 304, surface mounted, large capacity

Product Number: 410-70


Specifications:

Site location: Extra deep combination fixture is ideal for high traffic areas.

Dispensing: Paper towel dispenser will accept jumbo roll towels max. 8″ diameter (2-1/2” reserve roll).

Features: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Towel delivery is quiet and uniform. Hands free dispenser reduces paper flow, and provides maximum hygiene. Operates with 4 “D” size alkaline batteries or plug in AC adaptor. 4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish). Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Corrosion resistant galvanized steel (20 ga.).  Counterbalanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable galvanized steel liner (26 ga.) with 18 litre capacity (4 gallons).

Installation: Provide 37-1/4″ (94.6) high x 12-1/2″ (31.7) wide x 8-1/2″ (21.5) deep wall opening.
Drill mounting holes as required. For unrestricted access bottom of rough opening to floor must not exceed 25-3/4″ (65 cm), this will result in sensor being 47″ (119.3 cm) or less from floor.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 410-A - Combination Dispenser/Disposal Fixtures

410-A: Stainless type 304 fully recessed 410-B: Stainless type 304 semi recessed 410-C: Stainless type 304 surface mounted 410-PL: Solid core plastic laminate fully recessed

Product Number: 410A


Specifications:

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).

Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof rotomouded liner with 16.5 litre capacity (3.6 imp. gal. 4.4 US gallons).

Installation: Code 410A: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 410B: Provide 37-1/4″ (94.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 415 - Combination Dispenser/Disposal Fixtures

415A: Stainless type 304 fully recessed 415B: Stainless type 304 semi recessed 415C: Stainless type 304 surface mounted 415-14A: Stainless type 304 fully recessed 4-1/2" deep (dispenses multifold towels) 415-14C: Stainless type 304 surface mounted 4-1/2" deep (dispenses multifold towels) 415-14PL: Solid core plastic laminate fully recessed

Product Number: 415


Specifications:

Site Location: Compact combination fixture is ideal for low traffic areas.

Dispensing: Universal paper towel dispenser will accept all standard single fold and roll towels.

Features: Stainless steel (safety guarded) saw tooth cutting bar cutting bar.  Heavy duty 18 gauge stainless steel door (304, # 4 brushed finish).  Secured with two tumbler keyed locks.  All doors are hinged with full length stainless steel piano hinges.  Recessed body is corrosion resistant galvanized steel (20 ga.).
Counter balanced stainless steel door (20 ga.) provides maximum fire protection, mounted with full length piano hinge.  Removable leak proof roto mouded liner with 9.5 litre capacity (2.1 imp. gal., 2.5 US gallons).

Installation: Code 415A: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 6″ (15.2) deep wall opening.  Code 415B: Provide 30-1/4″ (80.6) high x 12-3/8″ (31.5) wide x 3″ (7.6) deep wall opening.  Collar is secured between recessed body flange and wall. Drill mounting holes as required. For unrestricted access, height of top of unit to floor must not exceed 57″ (144.7).


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 422 - Multi-Purpose Combination Towel / Waste Receptacles

422A: Stainless steel type 304, Recessed 4" 422C: Stainless steel type 304, Surface Mounted

Product Number: 422


Specifications:

REVIT

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Materials / Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.  Designed to dispense 500 multifold towels.  All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacities: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6kg.)  Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3kg.)  

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D.  Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of door does not exceed 48″ (120 cm) above floor level.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 422-50 - Control Roll Combination Towel / Waste Receptacle

422A-50: Stainless steel type 304, Recessed 4" 422C-50: Stainless steel type 304, Surface Mounted

Product Number: 422-50


Specifications:

Site Location: Semi recessed combination paper towel dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth. Control dispenser reduces paper waste.

Features: Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock. Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).

Materials: All stainless welded construction with locking removable waste bin.
Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.  Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422C: 11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that push lever does not exceed 48″ (120 cm) above floor level.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 422-60 -small

Code 422-60A: stainless steel type 304, recessed 4" Code 422-60C: stainless steel type 304, surface mounted Code 427-60A: stainless steel type 304, recessed 4" (comes with large receptacle) Code 422-60C: stainless steel type 304, surface mounted (comes with large receptacle)

Product Number: 422-60A, 422-60C, 427-60A, 427-60C


Specifications:

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

 

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 422-70 - Hands Free Combination Towel / Waste Receptacle

422A-70: Stainless steel type 304, Recessed 4" 422C-70: Stainless steel type 304, Surface Mounted

Product Number: 422-70


Specifications:

REVIT

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 11 gal. (50 litres), shipping weight: 50 lbs. (22.6 kg.), Code 422-70C:11 gal. (50 litres), shipping weight: 58 lbs. (26.3 kg.).

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 422-60 -small

427-60A: Stainless steel type 304, recessed, comes with large receptacle 427-60C: Stainless steel type 304, surface mounted, comes with large receptacle

Product Number: 427-60A, 427-60C


Specifications:

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: When pulling on the exposed length of towel the touch free dispenser will automatically cut an 11″ (27cm) length, leaving 3″ length of towel to grab onto for the next dispensing action. Hands free dispenser reduces paper flow and provides maximum hygiene. Designed to dispenser jumbo roll towels, max 8″ diameter.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 finish.

Capacity: Code 422-60: 11 gal. (50 litres), shipping weight: 50 lbs (22.6 kg) Code 427-60: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 5 1/2″ (13.7 cm) above floor level.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 427-70 Hands Free Combination Towel / Waste Receptacle

Stainless steel type 304, Recessed 4" (comes with large waste receptacle)

Product Number: 427-70


Specifications:

Site Location: Semi recessed combination dispenser / waste receptacle can be mounted into any wall configuration requiring a minimum of 4″ depth.

Touch Free: Large detection zone senses hand when placed in a natural position under dispenser to deliver a 12” length of towel. Paper towel dispenser delivery is quiet and uniform.  Hands free dispenser reduces paper flow, and provides maximum hygiene.  Operates with 4 “D” size alkaline batteries or plug in AC adaptor.  4 alkaline batteries have be independently tested and found to provide 35,000 hand dries.  Designed to dispense jumbo roll towels max. 8″ diameter (4″ reserve roll).  Cabinet door hinged with full length stainless piano hinge and is secured with keyed tumbler lock.

Materials: All stainless welded construction with locking removable waste bin.  Semi recessed design provides large capacity receptacle with minimum space.  Code 427 provides extra large waste capacity.  Waste receptacle is completely removable for convenient maintenance.
Comes with standard bag holder apparatus.  Recessed wall body and waste container are 22 gauge stainless steel type 304 No. 4 brushed finish.

Capacity: Code 422-70A: 15 gal. (68 litres), shipping weight: 59 lbs. (26.6 kg.)

Installation: Provide wall opening 54-1/2″ (138.9) H x 16″ (40.6) W x 4″ (10.2) D. Mount recessed frame first (drill holes as required), then insert waste bin using bracket provided. For barrier free mounting insure that bottom of rough opening does not exceed 8″ (20 cm) above floor level.

REVIT


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 705-100 - Liquid Soap Dispenser

Chrome plated body

Product Number: 705-100


Specifications:

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: All chrome plated body and mounting bracket. Chained keyed filter cap. Soap level indicator slots. All mounting screws concealed.

Soap Types: 705-100 is for use with coconut oil base soap at 10-20% solution. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: 12 oz. (340 g)

Installation: Secure mounting plate to wall through holes with four mounting screws provided. Slip dispenser over mounting plate and secure with single machine screw at bottom.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 707 - All Plastic Soap Dispenser

Lotion soap dispenser

Product Number: 707


Specifications:

Site Location: All purpose push type dispensing valve is suitable for easy flowing liquid or lotion soaps.

Features: Quality ABS finish. Removable inner soap reservoir for easy cleaning and maintenance. Lockable front cover. Attractive blue and white colour scheme. Completely concealed wall mounting (no visible mounting screws).

Capacity: 1 litre (35 oz.).

Installation: Secure unit to wall, screws, plugs and template provided. Alternately use adhesive pads on smooth dry surfaces.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 707-2L - Large Capacity All Plastic Soap Dispenser

Lotion soap dispenser, 2 litre (70 oz.) capacity, white finish.

Product Number: 707-2L


Specifications:

Site Location:  Extra large capacity soap dispenser with all purpose push type dispensing valve is suitable for high traffic and industrial areas.

Features: Quality ABS finish. With lockable front cover. Removable inner soap reservoir for easy cleaning and maintenance. Attractive blue and white colour scheme. Completely concealed wall mounting (no visible mounting screws). Dispenses a wide range of hygiene products: viscous liquid soaps to thick gels. 2ml shot size.

Capacity: 2 litre (70 oz.)

Installation: Secure unit to wall, screws, plugs and template provided. Alternately use adhesive pads on smooth dry surfaces, also provided.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 708-A - Tank Type Soap Dispenser

All purpose valve, vertical mounting

Product Number: 708A


Specifications:

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: Drawn and welded construction of 20 ga. stainless steel.  Easy refill at top.  Keyed lock filler cap.  Lucite soap level indicator window.  All mounting screws concealed.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: Capacity of 1.2 kg (40 oz.).

Installation: Secure mounting plate to wall through holes with three mounting screws provided. Slip dispenser over mounting plate and secure with single screw through filler cap at top.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost - 710-A - Tank Type Soap Dispenser

All purpose valve, horizontal mounting

Product Number: 710A


Specifications:

Site Location: The surface mounted unit is intended for any type of wall material or construction.

Features: Drawn and welded construction of 20 ga. stainless steel.  Easy refill at top.  Keyed lock filler cap.  Lucite soap level indicator window.  All mounting screws concealed.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: Capacity of 1.2 kg (40 oz.).

Installation:
Secure mounting plate to wall through holes with three mounting screws provided.
Slip dispenser over mounting plate and secure with single screw through filler cap at top.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 711 - Profile Soap Dispenser

Soap dispenser, all purpose valve, stainless steel

Product Number: 711


Specifications:

REVIT

Site Location: Clean low profile configuration allows for flexible integration with many custom design layouts.

Features: Easy refill at top. Keyed lock filler cap. All mounting screws concealed. Drawn and welded construction of 20 ga. stainless steel.  Lucite soap level indicator window.

Soap types: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps. We do not recommend any soap types that have an ammonium based surfactant, ie. Ammonium Lauryl Sulfate.

Capacity: 55 oz. capacity, (1.5 litre).

Installation: Secure mounting plate to wall through holes with three mounting screws provided. Slip dispenser over mounting plate and secure with single screw through filler cap at top.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 712 - Vanity Mounted Soap Dispenser

All purpose soap valve

Product Number: 712


Specifications:

REVIT

Site Location: Ideal for all types of vanity and countertop mounting.

Features: Less than 5 lbs. of force required to activate pump.  Chrome plated brass housing.  Concealed mounting assembly.  Soap can be top loaded.  4″ spout.

Soap Type: Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.

Capacity: 1 litre (32 oz.).

Installation:
Insert threaded shank through 7/8″ dia. hole in vanity with only housing and valve assembly exposed above counter.  Secure with brackets provide below. Attach globe.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 714P - Touch Free Soap Dispenser

Heavy duty plastic moulded cover.

Product Number: 714P


Specifications:

Site Location: Hands free soap dispenser is ideal for high traffic areas and multiple mirror mounting.

Features: Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Unit is powered by 3 “c” alkaline batteries (not included).  Battery life is 10,000 cycles. or one year. Low battery indicator (flashes red).  Bulk fill soap viscosity range of: 2,000 – 5,000 cps, (covers most liquid soap products).

Shipping Weight: 2 lbs., (bulk packed 12 units per case)

Capacity: 1 litre. (33 ounces)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Insure touchless unit is mounted 20 cm above any horizontal surface (30 cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning of unit if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 714S - Touch Free Soap Dispenser

Stainless steel, 304 no. 4 finish.

Product Number: 714S


Specifications:

REVIT

Site Location: Hands free soap dispensers is ideal for high traffic areas and multiple mirror mounting.

Features: Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Unit is powered by 3 “c” alkaline batteries (not included).  Battery life is 10,000 cycles. or one year. Low battery indicator (flashes red).  Bulk fill soap with a viscosity range of: 2,000 – 5,000 cps, (covers most liquid soap products).

Shipping Weight: 2 lbs., (bulk packed 12 units per case)

Capacity: 1 litre. (33 ounces)

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Insure stainless steel soap dispenser is mounted 20 cm above any horizontal surface (30 cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning of unit if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
frost_715 - 500x500

715: Counter Top Mounted, Auto Soap Dispenser. 715SK: Counter Top Mounted, Auto Soap Dispenser Starter Kit. Includes dispenser, 800ml soap container, 4 “D” cell alkaline batteries. 715-500: 800ml Lotion soap with moisturizer refills. (Case of 4)

Product Number: 715


Specifications:

Site Location: ADA compliant no touch dispenser allows for vanity, easy to reach, mounting.

Features: Hands free controlled dosage provides 1000 hand washes per 800ml bottle. Sensor detects user’s hand to automatically dispense ideal portion of soap. 4” (10) detection range. Refill indicator light appears when soap is low. Fabricated from structural injection moulded plastic with polished chrome finish. Battery indicator light appears when batteries need replacing. Battery Requirements: 4 Alkaline D Cells (not included). Programmable for 800ml and 1600ml soap refilling settings.

Installation: Comes with detailed installation instructions.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 717

Foam soap dispenser, touch free, bulk fill

Product Number: 717


Specifications:

Site Location: Ideal for high traffic areas and multiple mirror mounting. Foam soaps reduce consumption and improve washing effectiveness. Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit. Foam quatity dispensed: 0.7-0.8 cc. Soap container capacity: 800 cc (29.5 ounces). Unit is powered by 4 “AA” alkaline batteries (not included). Battery life is 20,000 cycles or one year. Low battery indicator: flashes blue.

Shipping Weight: 1.25kg, 2.75 lbs, (bulk packed 12 units per case).

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7 cm). Ensure unit is mounted 20cm above any horizontal surface (30cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for repositioning if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost code 718

Hands free bulk soap dispensers

Product Number: 718


Specifications:

Site Location: ADA compliant no touch dispenser allows for vanity, easy reach, mounting. Foam soaps reduce consumption and improve washing effectiveness.

Features: Bulk loading refill capacity: 1.5 litres (50.7 fl. oz.). Dispensing volume: 1-1.5 ml (.034 – .051 fl. oz.). Viscosity range 1-3000 cp. Takes all foam suitable soaps. Activated sensor range: 3″-4″. LED indicators for low battery, empty soap, and wrong soap type. AC adaptor included, comes with 60″ (1.5 meter) cord.

Materials: Main housing is cast brass with polished chrome finish.

Batteries: Can take 4 AA Alkaline batteries (not included). Battery life: 20,000 cycles or 1 year.

Installation: 25mm (1″) Dia. Hole required. Comes with detailed installation instructions.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.

Close
Frost 719

Product Number: 719


Specifications:

Site Location: The recess mounted unit is ideal for custom installations requiring a clean and minimal look.

Features: Door manufactured from 22 ga. stainless steel # 4 finish. Full length SS piano hinge and keyed tumbler lock on door. Recessed corrosion resistant galvanized steel body. Soap tank formed from a tough leak proof polycarbonate. Leak proof soap level indicator window.

Soap Type: dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.  Capacity: of 35 oz.

Installation: Rough opening: 8-1/2W (11.4) x 4-1/2 (11.4)H x 4″ (10.2)D. Drill mounting holes as req.


*Existing Customers Only

Order Download PDF

Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.