| |
All stainless full wall mounted shower seat, phenolic top, white finish.
Features: Compact flip up shower seat retracts out of way when
not in use. One piece phenolic top, 5/16” (8mm) thick. Unit
frame is fabricated from 1” O.D. 18 gauge brushed finish type 304
stainless steel. Welded construction, features full 360 degree welds on
all joints. Support and flanges are also stainless steel with
brushed finish.
Load Capacity: The shower seat will support a load of 450 lbs
when properly installed. The shower seat is only as strong as the
anchors and wall to which it is attached and therefore must be firmly
secured in order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.
Installation: Mounting hole locations are for reference when
providing in wall support. Final holes should be drilled using shower
seat as a template. Mounting screws provided.
|
Quality 
