|
| |
High speed hand dryer |
 |
 |
|
| |
Code 1192:
Code 1193: |
Hands free hand dryer, high speed, 120 volts, porcelain
white finish.
Hands free hand dryer, high speed, 120
volts, satin stainless steel finish. |
|
Flier
pdf |
|
|
   |
| |
Specifications: |
| |
Site Location: Ideal for areas with limited space requirements
and installations promoting power conservation.
LEED Credits:
Minimum energy performance: design and construction, EA prerequisite 2
Optimized energy performance: design and construction, EA Credit 1
Features: Blue L.E.D. Helps target ideal drying area. Drying
time: 10-12 seconds.
Outer casing is 16 ga. drawn steel with porcelain enameled finish.
Stainless steel: 16 ga. Whole unit is rated at 1600 watts. Heating
element is 900 watts. Dual ball bearings brush motor is 700W, 18000 R.P.M.
The decibel reading at 1 meter is 78.
Operating Voltage: 110-120 Vac, 50/60Hz, 1.3 - 1.6 kw. Amps
drawn: 14.5
Electrical Safety: Motor thermal protection: contains an auto
resetting thermostat which turns the unit off at 105° C (221° F). Motor
overload protection: motor assembly has a replaceable fuse.
Heater thermal protection: An auto resetting thermostat turns the unit
off at 85° C (185° F).
Drip proof: IP X1; Isolation: Class 1.
Performance: Air speed output: 100 m/s (225 mi/hr). Sensor range:
7” (18cm).
Warranty: Complete 5 years from date of purchase.
Maintenance, Exterior: Unit may be cleaned with soap and water or approved cleaning products/sanitizers.
Interior: Motor assembly and all working parts must
be kept clean from excessive dirt/dust and any form of foreign debris. Failure to maintain unit may reduce performance and result in void of warranty.
Shipping Weight: 6.6ks (14.6 lbs)
Installation: Supplied with mounting template, instructions,
screws and anchors. |
|
|
Description and specifications applicable on
date issued. Frost reserves the right to make improvements or
changes without
notice. |
|
Quality 
