Quality
Value
Service
 
  Heavy duty hands free hand dryer Go to previous specification in category Go to next specification in category
  Code 1189:

Code 1189-1:

 Heavy duty hands free hand dryer, cast iron, white porcelain finish.
Heavy duty hands free hand dryer, cast iron, white porcelain finish, 220 volt.		    
 
  Specifications:                                                                                                                                      
  Materials:
Cast iron, 6mm thick, porcelain enameled coating.
Specifications: Approximately 20-25 second drying time.  Voltage: 120 volts, 220 volts, (220 volt can be run on 208 volts ,50/60 hz).  Power consumption: 2,400 watts,
Features: Sound level: 70 db., 200 watt 5,500 rpm brush motor. Sensitive distance of sensor: 4-12” (10-30 cm). Touch free sensor is activated when hands are placed within the set range under spout. There is a .6 sec delay for on and a 2 second delay for off. The power will be cut off automatically in cases of irregular use over 120 seconds, sensor will reset during normal use. Sensor is 100% moisture proof.
Air volume: 345 m3/h (202 cfm), Wind velocity: 28 m/s (101 km/hr.)
Shipping weight: 12.0 kgs, (26.4 lbs.)
Installation: Insure when mounted that dryer is 12” (30cm) above any fixed or movable objects. For unrestricted access insure bottom of dryer does not exceed 48” (120 cm) from floor. Mounting screws and hole location template provided.

Description and specifications applicable on date issued.  Frost reserves the right to make improvements or changes without notice.