Safety rail, white finish Safety rail, stainless steel, polished satin finish Safety rail with removable toilet paper dispenser, white finish
Specifications:
Site Location: These units are highly recommended by barrier-free
design experts because they provide the optimum approach path for wheelchair
use. Consult applicable codes for specific requirements.
Features: Tubing is either 16 gauge type 304 1-1/4" O.D. (outside
diameter) stainless steel with exposed surfaces in polished satin finish
or 16 gauge steel with white finish. Swing up bar is only as
strong as the wall and anchors to which it is attached. Grab bar
must be securely fastened to wall to withstand the load it
is intended to support. The Code 1055 series
of bars will sustain loads of 250 lbs under it's intended use. Units
must be secured and anchored to wall or approved carrier according to
installation specifications by a qualified tradesperson. Mandrel bending process on all curves
maintains uniform bar diameter. Grab bar is manually lowered to
horizontal support position and raised for departure. A locking system enables
the flip up grab bar to be locked in either a horizontal or retracted position
Installation: Secure to wall where adequate in wall backing
exists. Use wall plate as a template to locate mounting holes.
Drill holes and set anchors as appropriate. Mount grab bar and secure
mounting screws. The 1055 flip up grab bar will
sustain loads of 250 lbs. and greater. Also the types of loads
(especially dynamic) applied are hard to predict. It's up to the
designer to determine the suitability of the use of these grab bars in
this situation. Caution: The grab bar is only as strong as the anchors
and wall to which it is attached and therefore must be firmly secured in
order to sustain the load(s) for which it is intended. We suggest installation by a qualified tradesperson.
Description and specifications applicable on
date issued. Frost reserves the right to make improvements or
changes without
notice.
Quality 
